Media Blasting
Thread Starter
Joined: Jul 1999
Posts: 12,096
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Media Blasting
Rear half done, front half being done this week.
This is done with glass media at 40psi. Then the car is sprayed with Eastwood 'after blast' to keep it from flash rusting.
It beats using a DA and creates a nice profile on the body for primer to etch to, and it completely removes any previous filler or rust that was hiding under the paint that might pop up down the road. $750 to do the whole car including the urethane bumpers.
Doors + rear quarters done together, front fenders, hood, front/rear bumper covers done off the car.
-- Joe
This is done with glass media at 40psi. Then the car is sprayed with Eastwood 'after blast' to keep it from flash rusting.
It beats using a DA and creates a nice profile on the body for primer to etch to, and it completely removes any previous filler or rust that was hiding under the paint that might pop up down the road. $750 to do the whole car including the urethane bumpers.
Doors + rear quarters done together, front fenders, hood, front/rear bumper covers done off the car.
-- Joe
Last edited by anesthes; Jun 15, 2013 at 10:40 AM.
Thread Starter
Joined: Jul 1999
Posts: 12,096
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Thread Starter
Joined: Jul 1999
Posts: 12,096
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Media Blasting
You bet. well taped off!
Unfortunately I found that the drivers door had about a quart of filler in it from collision damage. At least the car really had no rot, other than the blackish spot you see behind the drivers door which just needs a little filler to hide the pitting.
-- Joe
Unfortunately I found that the drivers door had about a quart of filler in it from collision damage. At least the car really had no rot, other than the blackish spot you see behind the drivers door which just needs a little filler to hide the pitting.
-- Joe
Thread Starter
Joined: Jul 1999
Posts: 12,096
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Media Blasting
Just waiting for the hood to be finished. The car will be painted with doors/fenders/hood on, but everything else painted off the car.
Thinking about WA-9414 GM yellow with black accents (bumperetts, mirrors, t-tops, wheels, maybe wing?)
-- Joe
Thinking about WA-9414 GM yellow with black accents (bumperetts, mirrors, t-tops, wheels, maybe wing?)
-- Joe
Thread Starter
Joined: Jul 1999
Posts: 12,096
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Media Blasting
Jams and body primered with proform epoxy. (two wet coats).
Look at the drivers door. Not sure If I want to use the amount of filler required to save it.
Got a lot of filler to do. Then more primer and color.
-- Joe
Look at the drivers door. Not sure If I want to use the amount of filler required to save it.
Got a lot of filler to do. Then more primer and color.
-- Joe
Trending Topics
Thread Starter
Joined: Jul 1999
Posts: 12,096
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Thread Starter
Joined: Jul 1999
Posts: 12,096
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Media Blasting
Finished. gotta wet sand the clear for numerous reasons but, this is the color.
Tangerine Twist basecoat, with PPG MC-161 clear.
This car has like hundreds of hours of filling and blocking. I could have painted it black but I just wanted to go bright.
-- Joe
Tangerine Twist basecoat, with PPG MC-161 clear.
This car has like hundreds of hours of filling and blocking. I could have painted it black but I just wanted to go bright.
-- Joe
Senior Member
iTrader: (2)
Joined: Mar 2003
Posts: 859
Likes: 5
From: Birmingham Alabama
Car: 1991 Firebird convertible
Engine: LQ4 ls 6.0
Transmission: 4L60E
Axle/Gears: 342 Limited slip
Re: Media Blasting
I like the tangerine I was going with this color in a candy but went with candy apply red and you will be happy after it is wetsanded and buffed out nice car
Thread Starter
Joined: Jul 1999
Posts: 12,096
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: Media Blasting
Thank you guys for the compliments!
Hopefully start getting everything together next week. I gotta spray all the trim stuff this weekend before it gets too cold.
-- Joe
Hopefully start getting everything together next week. I gotta spray all the trim stuff this weekend before it gets too cold.
-- Joe
Thread
Thread Starter
Forum
Replies
Last Post
[Sold] Flowmaster exhaust system
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
4
Oct 9, 2015 09:25 AM
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
0
Sep 25, 2015 04:47 AM










