How to replace window molding?
06-23-2014, 01:33 PM
#1
Junior Member
Thread Starter
Join Date: Oct 2012
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
How to replace window molding?
92 Camaro RS
When I put the windows up the glass does not line up with the rubber molding. I hear loud wind blow thru the car when driving and I took the car thru the car wash today and it was like Niagara falls coming in.
Is it possible to remove the old rubber window molding and replace it? Where can I buy the new molding?
When I put the windows up the glass does not line up with the rubber molding. I hear loud wind blow thru the car when driving and I took the car thru the car wash today and it was like Niagara falls coming in.
Is it possible to remove the old rubber window molding and replace it? Where can I buy the new molding?
06-23-2014, 07:19 PM
#3
Supreme Member
iTrader: (1)
Join Date: Aug 2008
Location: Short Summer, VT
Posts: 1,485
Likes: 0
Received 3 Likes
on
3 Posts
Car: 1985 Trans Am T-Top
Engine: 305 TPI
Transmission: T-5 5 Speed
Axle/Gears: 3.42 posi 1LE 10 bolt
Re: How to replace window molding?
I think he's referring to the seal around the door glass.
Sounds like you need to adjust the window.
Lots of good threads on this recently.
You will need to remove the door card and adjust the tracks.
Here's the tech guide:
https://www.thirdgen.org/windowadjust
Sounds like you need to adjust the window.
Lots of good threads on this recently.
You will need to remove the door card and adjust the tracks.
Here's the tech guide:
https://www.thirdgen.org/windowadjust
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM