I know I saw it in the posts about ls1 swaps but for the life of me I cannot find it.

Someone listed what I believe was a ford cobra carrier bolt application that would work for us?

I'm out of luck finding the proper m12*1.5 and 30-35 mm near me.

Someone have a part # or alterantive that will work?

thanks
Jeremy

 

Here's the p/n 10229606
I ordered them from gmpartsdirect.com. Just to clarify, these are the bolts to attach the caliper carrier to the adaptor bracket. Also, I had to cut the bolts down about 1/4".

These aren't the ford bolts, sorry.

 

lol

thanks, its a start, just need to get them today/t'row morning so I can get the frt end back on the car this weekend(sat) gonna be in the teens on sunday lol

later
Jeremy


Anyone have that ford number handy?

 

Hi Jeremy, here's the ford p/n - N805163-S100

here's the link to the LS1 thread page, I found it in:

https://www.thirdgen.org/techbb2/sho...5&pagenumber=8

Gary

 

thanks a million

I knew I found it before, but for the life of me I couldnt get the part # or find it again :-)


Jeremy

 

Interesting find, at least on my caliper carriers.

My bolts are m12*1.75 and 30 mm long .....

Is there confusion about the proper size or are mine merely redrilled/tapped during the reman process?

Just curious if there is an issue here or not because I've heard everyone say m12*1.50

Anyone lese have this issue?

later
Jeremy