Please help me finding this part!
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 9
Likes: 0
From: Overland Park, KS
Car: 1986 Camaro Iroc-Z28
Engine: 305 5.0 L
Transmission: 5 speed
Please help me finding this part!
I have a 1986 Camaro IROC-Z28 with the 5.0L V8 and i went to pull my parking brake and i lost tension. I lifted my car and i found that the equlizer bracket was broke. The bracket is where the two cords from each brake come together to one. GM doesn't make the part anymore and i'm having a hell of a time finding a replacement. Please help with any advise. Thank you.
Supreme Member
Joined: Jun 2005
Posts: 1,800
Likes: 2
From: Bremerton, WA
Car: 1992 RS / 1989 RS
Engine: 3.1L MFI / Vortec 383 TBI
Transmission: T5 / LS-T56
Axle/Gears: 3.42 open / 3.73 Eaton posi
Re: Please help me finding this part!
If you mean the piece that's held onto the front cable with an adjusting nut, I have one. I'll have to remove it from the cable it's still attached to. Came off the car when I installed LS1 rears.
Last edited by Al Hasse; Nov 20, 2009 at 12:40 AM.
Supreme Member
Joined: Jun 2005
Posts: 1,800
Likes: 2
From: Bremerton, WA
Car: 1992 RS / 1989 RS
Engine: 3.1L MFI / Vortec 383 TBI
Transmission: T5 / LS-T56
Axle/Gears: 3.42 open / 3.73 Eaton posi
Re: Please help me finding this part!
PM me your address and I'll send it out to you. I can't use it any more, and it's small enough to where postage won't be much.
Thread Starter
Junior Member
Joined: Nov 2009
Posts: 9
Likes: 0
From: Overland Park, KS
Car: 1986 Camaro Iroc-Z28
Engine: 305 5.0 L
Transmission: 5 speed
Re: Please help me finding this part!
Thank you so much i really appericate it.
Dillon Menzel
XXXXX XXXXXX XX
XXXXXXXX XXXX, XX XXXXX
Dillon Menzel
XXXXX XXXXXX XX
XXXXXXXX XXXX, XX XXXXX
Last edited by Dmenz33; Nov 22, 2009 at 07:46 PM.
Supreme Member
Joined: Jun 2005
Posts: 1,800
Likes: 2
From: Bremerton, WA
Car: 1992 RS / 1989 RS
Engine: 3.1L MFI / Vortec 383 TBI
Transmission: T5 / LS-T56
Axle/Gears: 3.42 open / 3.73 Eaton posi
Re: Please help me finding this part!
I'll get it out Monday.
Just for information, PM = Private Message (click on my name at the left and the option shows), so that personal info doesn't get into the public forums.
BTW, welcome to TGO
Al
Just for information, PM = Private Message (click on my name at the left and the option shows), so that personal info doesn't get into the public forums.
BTW, welcome to TGO
Al
Last edited by Al Hasse; Nov 22, 2009 at 01:04 AM.
Thread
Thread Starter
Forum
Replies
Last Post




