So I have some rear discs calipers and I am trying to hook them up.
I have a 1/4 line running from the distribution block to the rear of my car, but it doesn't have a fitting or a flare on it, nor does it have the rubber flex hose that is supposed to be on the end of it.

Then I have two 3/16 lines running into the calipers.

I have been trying to hook them up without the rubber hose just to get it running again. So I was look for a tee with a 1/4 in to a 3/16 outs, but I haven't come across a single one.

So my question is, what parts would I need to hook up my 1/4 line, to a rubber flex hose, the to my 3/16 lines?

nevermind, found it.

acdelco 18j1280