91 z28 in MI
Thread Starter
Junior Member
Joined: Jun 2007
Posts: 35
Likes: 0
From: Sterling Heights,MI
Car: 91 Z28
Engine: l98 5.7 TPI
Transmission: 700R4,2600TCI stall,Trans Go
Axle/Gears: 3:73
91 z28 in MI
I have a 1991 z28 for sale, this is a l98 j65 g92 car. It is white with tan interior.
It has a fresh 350 in it (about 4500 miles), the motor is a 350 roller bored 40 over, vortec heads with stainless valves, 2.02 / 1.60 's, .510 lift springs, 1.5 roller rockers, slp cam made by comp (218/224 duration and 498/502 lift).
The intake is vortec tpi lower (made by edelbrock), accell large tube runners, ported plenum (egr passage ground down and gasket matched) stock throttle body,k&n filters. It also has accell adjustable fuel pressure regulator, 24lb fms injectors, 180 t-stat, a 255gph pump.
For exhaust it has shorty hedman headers, with a hooker exhuast. The ac compressor and condensor and air pump have been removed.I have the ac delete pulley and box installed.
The suspension has lakewood control arms and panhard bar, newer brakes (4 wheel disc), car has goodyear gs-c tires on stock wheels.
The trans was rebuilt in June of last year. During the rebuild a Trans go shift kit, TCI stall converter and 3:73 gears were installed new.There is a B&M console rachet shifter installed. Also have a MSD 6a box.The car has been professinaly dyno tuned.Have dyno sheet.
The car has power windows, locks, tilt, cruise, it also has a newer gm cd player, the body is in good shape and so is the interior the dash is not cracked.There is a slight tear on the drivers seat bolster. There's about 103k on the body I have the orignal shipping slip and build sheet, reciepts for work done. asking 5300 obo
Willing to trade for Park avenue, bonneville,maxma or another daily driver. No suv's bikes,or quads
It has a fresh 350 in it (about 4500 miles), the motor is a 350 roller bored 40 over, vortec heads with stainless valves, 2.02 / 1.60 's, .510 lift springs, 1.5 roller rockers, slp cam made by comp (218/224 duration and 498/502 lift).
The intake is vortec tpi lower (made by edelbrock), accell large tube runners, ported plenum (egr passage ground down and gasket matched) stock throttle body,k&n filters. It also has accell adjustable fuel pressure regulator, 24lb fms injectors, 180 t-stat, a 255gph pump.
For exhaust it has shorty hedman headers, with a hooker exhuast. The ac compressor and condensor and air pump have been removed.I have the ac delete pulley and box installed.
The suspension has lakewood control arms and panhard bar, newer brakes (4 wheel disc), car has goodyear gs-c tires on stock wheels.
The trans was rebuilt in June of last year. During the rebuild a Trans go shift kit, TCI stall converter and 3:73 gears were installed new.There is a B&M console rachet shifter installed. Also have a MSD 6a box.The car has been professinaly dyno tuned.Have dyno sheet.
The car has power windows, locks, tilt, cruise, it also has a newer gm cd player, the body is in good shape and so is the interior the dash is not cracked.There is a slight tear on the drivers seat bolster. There's about 103k on the body I have the orignal shipping slip and build sheet, reciepts for work done. asking 5300 obo
Willing to trade for Park avenue, bonneville,maxma or another daily driver. No suv's bikes,or quads
Thread
Thread Starter
Forum
Replies
Last Post
blackz281le
Camaros for Sale
8
Jan 11, 2016 07:51 AM
[Sold] Flowmaster exhaust system
Night rider327
Engine/Drivetrain/Suspension Parts for Sale
4
Oct 9, 2015 09:25 AM




