84 Camaro Roller
84 Camaro Roller
1984 Camaro Has Clean Title Unknown Amount Of miles
$9500
Comes With
Midwest Chassis Chromoly Fab9'
Has 35 Spline Strange Axles
Strange Aluminum Lightweight Center Section With 3.89 Gear
Strange S Series Rear Brakes
Midwest Chassis Chromoly Long Torque Arm
Midwest Chassis Chromoly Anti-Roll Bar
Midwest Chassis Chromoly Lower Control Arms And Panhard Bar
Afco Rear Springs 10x150
Chris Alston Aluminum Double Adjustable Rear Shocks
Wolfe Racecraft Adjustable Spring Perch
Wolfe Racecraft Mini-tubs Installed
Removable Parachute Mount
Flaming River Push/Pull Cutoff
Brackets and Mount In Trunk For 5-gallon Fuel Cell
Thru The Floor Subframe Connectors
Kirkey Aluminum Seat
RJS Window Net
RJS Seat Belts
Dash Has Been Cleaned Up and Lightened
Strange Master Cylinder
Racecraft Kmember With Sbc/BBC Motor Mounts
Racecraft Adjustable A-arms
Racecraft 2" Dropped Spindles
Racecraft Caster Camber Plates
Racecraft Coil Over Setup On Lakewood 90/10 struts
TRZ Motorsports Steering Column
Flaming River Rack & Pinion
Racecraft Bumpsteer kit
Strange 4 piston front brakes
Harwood 4" Hood
10pt Chromoly Cage
Doors Have Been Gutted With Working Manual Crank Windows
Battery Tray Installed
Car Has Had Weight Cut Out Tastefully So It Doesnt Looked Hacked It Was Weighed Coming Out Of The Chassis Shop Last Year And Weighed 2040 And since Then Has Had Lighter Parts Added Car Has Been 1.28 With New Shocks Im Sure With More HP Could Be Alot Better
Not Sure What Else I Am Missing To List
Any Questions Feel Free To Ask
Link To Photobucket With Pictures
http://s293.photobucket.com/albums/m...ntrite/Camaro/
Thanks Ryan
$9500
Comes With
Midwest Chassis Chromoly Fab9'
Has 35 Spline Strange Axles
Strange Aluminum Lightweight Center Section With 3.89 Gear
Strange S Series Rear Brakes
Midwest Chassis Chromoly Long Torque Arm
Midwest Chassis Chromoly Anti-Roll Bar
Midwest Chassis Chromoly Lower Control Arms And Panhard Bar
Afco Rear Springs 10x150
Chris Alston Aluminum Double Adjustable Rear Shocks
Wolfe Racecraft Adjustable Spring Perch
Wolfe Racecraft Mini-tubs Installed
Removable Parachute Mount
Flaming River Push/Pull Cutoff
Brackets and Mount In Trunk For 5-gallon Fuel Cell
Thru The Floor Subframe Connectors
Kirkey Aluminum Seat
RJS Window Net
RJS Seat Belts
Dash Has Been Cleaned Up and Lightened
Strange Master Cylinder
Racecraft Kmember With Sbc/BBC Motor Mounts
Racecraft Adjustable A-arms
Racecraft 2" Dropped Spindles
Racecraft Caster Camber Plates
Racecraft Coil Over Setup On Lakewood 90/10 struts
TRZ Motorsports Steering Column
Flaming River Rack & Pinion
Racecraft Bumpsteer kit
Strange 4 piston front brakes
Harwood 4" Hood
10pt Chromoly Cage
Doors Have Been Gutted With Working Manual Crank Windows
Battery Tray Installed
Car Has Had Weight Cut Out Tastefully So It Doesnt Looked Hacked It Was Weighed Coming Out Of The Chassis Shop Last Year And Weighed 2040 And since Then Has Had Lighter Parts Added Car Has Been 1.28 With New Shocks Im Sure With More HP Could Be Alot Better
Not Sure What Else I Am Missing To List
Any Questions Feel Free To Ask
Link To Photobucket With Pictures
http://s293.photobucket.com/albums/m...ntrite/Camaro/
Thanks Ryan
Thread
Thread Starter
Forum
Replies
Last Post
junkcltr
Tech / General Engine
6
Aug 2, 2019 11:12 PM
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
IrocZ'85
Engine/Drivetrain/Suspension Parts for Sale
0
Aug 17, 2015 06:24 PM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM





