[MN] 1982 25.5 Camaro
#1
Senior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2003
Location: MN
Posts: 721
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1982 Camaro
Engine: 555 BBC
Transmission: TSI Glide
Axle/Gears: Aluminum Moser 3.89
1982 25.5 Camaro
True stock suspension 1982 Camaro 25.5 Cert all chromoly. (expired).
mini-tubbed, can fit up to 29x10.5 or 315 radial with no clearance issues.
New paint in 2013, stripped to bare metal, hew front fenders, filled in fuel door, locks. Plastic headlights, Harwood 2 in cowl hood, with black painted scoop installed. Pro-glass front and rear glass.
Note: the hood scoop is now black and lowered onto the hood more.
PA Racing Chromoly k member and a-arms. Chromoly LCA's
Strange Mustang single adjustable struts converted to fit a Camaro, new spare set included.
Aluminum driveshaft
All new stainless u bends and tubing with stainless merge collectors to build a set of 2 3/8th-2 1/2 front exit headers.
two kirkey 17 inch seats.
rear seat can still be installed.
Car is set up for BBC/glide, has two motor plate sets for two different engine offsets.
SX Fuel pump with 10 gallon cell in rear of car.
Has headlight and turn signals.
Racecraft rear single beadlocks M/T 15x12 rims,
Strange brakes front, Wilwood rears.
No electronics in the car,
Was converting car to front mount cell and radiator.
Car will need that built or a lower radiator mount to fit factory alum. replacement radiator that is included.
All of the following items are new, 35 spline solid Strange axles, 4.11 Richmond Pro gear, bearings,housing was stripped then braced, Wofle anti roll bar,added Racecraft adjustable lower control arm brackets(6 hole adjustment), front 15x3 M/T front rims, Menscer rear coilovers, Simpson chute. All rod ends have been replaced in the rear. Whole rear suspension was stripped and re powder coated black.
Car weighs 3150lbs with driver and bbc motor. It would go under 3100 by removing the interior console, plastics, and dash pad, even more if the interior sheet metal was removed or a fiberglass nose installed.
13,500
Call or text for more information
651-366-74 six six
mini-tubbed, can fit up to 29x10.5 or 315 radial with no clearance issues.
New paint in 2013, stripped to bare metal, hew front fenders, filled in fuel door, locks. Plastic headlights, Harwood 2 in cowl hood, with black painted scoop installed. Pro-glass front and rear glass.
Note: the hood scoop is now black and lowered onto the hood more.
PA Racing Chromoly k member and a-arms. Chromoly LCA's
Strange Mustang single adjustable struts converted to fit a Camaro, new spare set included.
Aluminum driveshaft
All new stainless u bends and tubing with stainless merge collectors to build a set of 2 3/8th-2 1/2 front exit headers.
two kirkey 17 inch seats.
rear seat can still be installed.
Car is set up for BBC/glide, has two motor plate sets for two different engine offsets.
SX Fuel pump with 10 gallon cell in rear of car.
Has headlight and turn signals.
Racecraft rear single beadlocks M/T 15x12 rims,
Strange brakes front, Wilwood rears.
No electronics in the car,
Was converting car to front mount cell and radiator.
Car will need that built or a lower radiator mount to fit factory alum. replacement radiator that is included.
All of the following items are new, 35 spline solid Strange axles, 4.11 Richmond Pro gear, bearings,housing was stripped then braced, Wofle anti roll bar,added Racecraft adjustable lower control arm brackets(6 hole adjustment), front 15x3 M/T front rims, Menscer rear coilovers, Simpson chute. All rod ends have been replaced in the rear. Whole rear suspension was stripped and re powder coated black.
Car weighs 3150lbs with driver and bbc motor. It would go under 3100 by removing the interior console, plastics, and dash pad, even more if the interior sheet metal was removed or a fiberglass nose installed.
13,500
Call or text for more information
651-366-74 six six
Thread
Thread Starter
Forum
Replies
Last Post