Trade a 95' Arctic Cat ZR 580 for an IROC/Z28 Ohio
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 41
Likes: 0
From: Grove City Ohio
Car: 89 Z28
Engine: 355 full roller, Brodix 10X heads
Transmission: Close ratio Muncie
Axle/Gears: 3.42/7.5
Trade a 95' Arctic Cat ZR 580 for an IROC/Z28 Ohio
I would like to trade my 1995 Arctic Cat ZR 580 for a 3rd gen IROC or Z28.
Here is what I have: 1995 ZR 580, 2013 miles on it, 168 studs, plastic skis, Black Magic Clutch Kit, analog EGT and mechanical water temp gauge, thermal wrap on pipe, muffler and pipe have been acid dipped to remove the baffle material. It has extra wheel kits to race on grass, new seat cover and seat foam, new "Team Arctic" snow flap. You will also get a storage cover, PowerMadd lift, all of my jets, service manual, cooling connectors for use when racing(cooler is gone), clutch alignment tool, clutch puller and clutch spider tool. The hood has the normal scratches and spider cracks, but the clear over the decals has dis-colored and is peeling in places. Some of the parts have gathered rust from setting. The last time I had it out, it went 9.02 @ 89.88 mph in 500' on grass with a 240lbs rider(me). To trail ride, just change the clutch spring and adjust the suspension.
What I am looking for: 3rd gen IROC or Z28, non T-Top, 4 wheel disc brake, 5 speed(preferred, but not required). It will need to be complete, but not original, have a decent interior, and little rust. This will be a project car for my family to work on.
I am in located in Central Ohio, but frequently go to Northwest Ohio. If anyone is interested, pm or email me @ srpllc2005@sbcglobal.net
We can trade pics and hopefullly make a deal....
There's no snow in Central Ohio!
Billy
Here is what I have: 1995 ZR 580, 2013 miles on it, 168 studs, plastic skis, Black Magic Clutch Kit, analog EGT and mechanical water temp gauge, thermal wrap on pipe, muffler and pipe have been acid dipped to remove the baffle material. It has extra wheel kits to race on grass, new seat cover and seat foam, new "Team Arctic" snow flap. You will also get a storage cover, PowerMadd lift, all of my jets, service manual, cooling connectors for use when racing(cooler is gone), clutch alignment tool, clutch puller and clutch spider tool. The hood has the normal scratches and spider cracks, but the clear over the decals has dis-colored and is peeling in places. Some of the parts have gathered rust from setting. The last time I had it out, it went 9.02 @ 89.88 mph in 500' on grass with a 240lbs rider(me). To trail ride, just change the clutch spring and adjust the suspension.
What I am looking for: 3rd gen IROC or Z28, non T-Top, 4 wheel disc brake, 5 speed(preferred, but not required). It will need to be complete, but not original, have a decent interior, and little rust. This will be a project car for my family to work on.
I am in located in Central Ohio, but frequently go to Northwest Ohio. If anyone is interested, pm or email me @ srpllc2005@sbcglobal.net
We can trade pics and hopefullly make a deal....
There's no snow in Central Ohio!
Billy
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 41
Likes: 0
From: Grove City Ohio
Car: 89 Z28
Engine: 355 full roller, Brodix 10X heads
Transmission: Close ratio Muncie
Axle/Gears: 3.42/7.5
I forgot to add the car does not have to run, just be all there. Carb, TBi or TPI, it doesn't matter. I really want to move this sled and get a third gen to work on with my son....
Thread Starter
Junior Member
Joined: Oct 2006
Posts: 41
Likes: 0
From: Grove City Ohio
Car: 89 Z28
Engine: 355 full roller, Brodix 10X heads
Transmission: Close ratio Muncie
Axle/Gears: 3.42/7.5
I ordered new decals for the hood and I am getting the hood and tunnel and any rusted parts painted over the next two weeks.
I need cash to buy a IROC or Z28
Price is VERY Negotiable........
I need cash to buy a IROC or Z28
Price is VERY Negotiable........
Thread
Thread Starter
Forum
Replies
Last Post
LT1Formula
Engine/Drivetrain/Suspension Parts for Sale
7
Oct 8, 2015 08:34 PM





