looking for a solid body
Thread Starter
Member
iTrader: (32)
Joined: Oct 2003
Posts: 448
Likes: 2
From: Indiana
Car: '88 Camaro
Engine: LS3
Transmission: Mag F
Axle/Gears: 9" 4.11
looking for a solid body
hey guys,
after going through about 3 or 4 rollers that ive travelled to get and finding issues, im on the hunt again, but not so picky anymore, because while at first i wanted a 91-92 z28 theres really not gonna be anything original about it. Im tired of looking at my dissassembled race car with no body to put it in. and i damn sure am not gonna hack up my 92 for it.
SO heres what im looking for
100% rust free fbody shell.
looking for a 91-92 honestly, dont care what model it is as i have enough parts to make it what ever i want. I will look at 85-90s but ive had the mind to kind of clone my existing 92. Once again i wont pass down a completely rust free shell.
Hardtop car is main priority, ive had enough of ttops that i want to stay away from them for a while. Once again i wont pass down a ttop car that is too hard to pass up.
Prefer a 5 speed car so i dont have to do the conversion again, but not a must. Engine doesnt matter v6 or 8, because quite honestly i dont want it and would prefer that i got just a rolling car, hell the interior can be gone also as i dont need any of it.
I will travel depending on the vehicle. Like i said if someone wanted to demod a project or had a non running car that met this criteria id be estatic. I really only want the rolling chassis, dash and wiring, and body panels (some of those i wont use either.) and 4 wheels and tires that hold air to get it on a trailer.
Of course since im not wanting a driver car, the lower the cost the better, i probably have 15k worth of stuff laying on my shop floor to put in a car and it bothers me its still laying there.
Please be advised that if you arent local enough for me to somewhat convieniently come look at hte car, i am gonna ask for lots of pictures in lots of crazy areas to verify you have what im looking for. I do not want to waste my time or yours and would be very frustrated to travel X amount of hours to find what ive already found here. If i end up buying your car or project, then of course i will be more than happy to compensate you for your half hour of time to pull carpet back, and crawl around and get the pictures for me.
Hopefully i can find something around here. I always have parts to trade also if you are looking for something.
thanks!
randy
after going through about 3 or 4 rollers that ive travelled to get and finding issues, im on the hunt again, but not so picky anymore, because while at first i wanted a 91-92 z28 theres really not gonna be anything original about it. Im tired of looking at my dissassembled race car with no body to put it in. and i damn sure am not gonna hack up my 92 for it.
SO heres what im looking for
100% rust free fbody shell.
looking for a 91-92 honestly, dont care what model it is as i have enough parts to make it what ever i want. I will look at 85-90s but ive had the mind to kind of clone my existing 92. Once again i wont pass down a completely rust free shell.
Hardtop car is main priority, ive had enough of ttops that i want to stay away from them for a while. Once again i wont pass down a ttop car that is too hard to pass up.
Prefer a 5 speed car so i dont have to do the conversion again, but not a must. Engine doesnt matter v6 or 8, because quite honestly i dont want it and would prefer that i got just a rolling car, hell the interior can be gone also as i dont need any of it.
I will travel depending on the vehicle. Like i said if someone wanted to demod a project or had a non running car that met this criteria id be estatic. I really only want the rolling chassis, dash and wiring, and body panels (some of those i wont use either.) and 4 wheels and tires that hold air to get it on a trailer.
Of course since im not wanting a driver car, the lower the cost the better, i probably have 15k worth of stuff laying on my shop floor to put in a car and it bothers me its still laying there.
Please be advised that if you arent local enough for me to somewhat convieniently come look at hte car, i am gonna ask for lots of pictures in lots of crazy areas to verify you have what im looking for. I do not want to waste my time or yours and would be very frustrated to travel X amount of hours to find what ive already found here. If i end up buying your car or project, then of course i will be more than happy to compensate you for your half hour of time to pull carpet back, and crawl around and get the pictures for me.
Hopefully i can find something around here. I always have parts to trade also if you are looking for something.
thanks!
randy
Senior Member
iTrader: (7)
Joined: Dec 2007
Posts: 618
Likes: 0
From: Williamstown, NJ
Car: '98 Mustang GT
Engine: '03 4.6L
Transmission: T45
Axle/Gears: DK
Re: looking for a solid body
I'd sell my roller project. It is in my signature below. Problem is that we are a distance apart.
Junior Member


Joined: Jun 2009
Posts: 49
Likes: 9
From: North Central Indiana! GO IRISH
Car: 89 PONTIAC TRANS AM
Engine: 5.0 TPI
Transmission: Stock 4SP 700R4
Axle/Gears: 4TH GEN 3:23
Re: looking for a solid body
Hey Randy I believe we spoke before by email for my 91 z28 with a hardtop and 350 tpi. I live in north central indiana. I sent you a bunch of pics. I never heard back from you but if your still interested just email me or pm me.
Supreme Member
Joined: Oct 2001
Posts: 1,392
Likes: 4
From: orlando, fl usa
Car: 1986 pontiac TA
Engine: 360 HSR
Transmission: 700r4 3300 yank converter
Axle/Gears: 3.27 9 bolt
Re: looking for a solid body
willing to travel to florida?
https://www.thirdgen.org/forums/cama...ml#post4301384
https://www.thirdgen.org/forums/cama...ml#post4301384
Want a title? Post!
Joined: Nov 2009
Posts: 0
Likes: 0
From: waldo arkansas
Car: 1992 camaro
Engine: na
Transmission: na
Axle/Gears: 4.10
Re: looking for a solid body
I got wut u need. I have a 92 hardtop that the seats carpet steering wheel are gone but the body is straight. No rust but needs paint. I got pictures 8709142856.
Member
iTrader: (10)
Joined: Apr 2006
Posts: 400
Likes: 0
From: Joliet IL
Car: 89 Camaro Convert,89 Camaro hardtop
Engine: 305 and a 357
Transmission: 700R4,T5
Axle/Gears: 4.10's and 3.43's
Re: looking for a solid body
I also have what you need rust free 89 rs 30 k orig miles send me a pm if interested
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
Kenwood
Engine/Drivetrain/Suspension Parts for Sale
1
Sep 4, 2015 05:50 PM
Hotrodboba400
Firebirds for Sale
0
Sep 2, 2015 07:28 PM




