Since us Canadians have problems with shipping or dealing with sellers across the border, for the time being I will allow for sale ads to be posted as within this thread.

Remember that thirdgen.org is not responsible for the transactions taking place on the board. They are private transactions.

Let me know when the parts are sold so I can delete the posts then.

Also, please do not respond to ads within this thread. Please PM or email the seller.

please delete, thanks.

Guys : I will accept any reasonable offers on this stuff .......I wanna sell this stuff

ECM ----------$50

Egnition Mod -------------$30

Used coil ------------$30

Front air dam cover -----------$40

wiper motor -----------$40

Speaker covers --------$40

2 Rear 88 Style Iroc rims with tires ----------------------------$100/pair

Dash unit (Complete...has all 6 vents)------------$80

Rear interior parts (all 5 pieces )---------------- $80

Back Seat Ashtray-----------------$20

temp panel---(with A/C setting)---------------$40

Headliner -------------------------------Grey .......$40

Dash cluster------------------single needle style with all gauges-----$50

Center console (Black with Grey carpet on sides )--------$60

Console pad------good shape ----------$40

Horn Botton---------(Mint Shape)----------$40

Rad (Good shape)--------------------------Aluminum-----SOLD

Tail lights --------$60 for both


I think thats all but i will update if anything changes

If anyone needs anything from this list let me know !!

Please email, Pm or call me to come by Any time !!
Mark (416)606-5974 camarocountry@rogers.com
_________________

I have a 3.73 gear for a 10 bolts rearend with complete bearing kit that goes with it. Both brand new. (I've got a 9 bolts on mine so it's no use for me )

selling both for 300$ CDN + whatever shipping cost. paid over 400$

drbbs@msn.com

hey Dr.BBS i might be interested in the 3.73s you got for sale, i need to check the bolt pattern first.

ok well, I'm going to laval this weekend, so if you're quick enough, you could have it before december come by

BTW I still have the receip from JMracing in repentigny for both (the gear and the bearing kit)

Ive got a vast selection of 3rd gen parts. Its all I do.. convertible parts available too! Check out my site www.irocnparts.com and email me your requests! I promise to get back to you as soon as possible!! with pics too!!! thanks!! great idea on the classifieds thing

Looking for the following parts for my 92 GTA

Alternator
Power Steering Pump
A/C Compressor w/ Lines

Dj

Alternator - $65CDN
Power steering pump - $45 CDN
A/C compressor w/Lines - $55 CDN

let me know
thanks

Set of 2 lower ball joints. Brand new. Bought them four years ago, but I decided to buy the whole control arm instead. Made by Federal Mogul. Paid $55, make me an offer, PM or email.

Hi, hope someone in Canada migh be able to help me find some plastic trim pieces for the inside door armrests for my 89 Trans Am. See this page for photos and descritptions (only 88 and 89 had these in the correct color) http://la.rsson.com/tta1078/looking4/looking4.html

Any help would be really appreciated as I've been missing the driver side since I bought the car over 3 years ago and the passanger side on is cracked and needs to be replaced...

I got $$$s waiting!

Remember to PM me when the parts are sold so I can delete obsolete posts.

I'm selling my 1989 Pontiac Firebird Coupe / Je vend mon Pontiac Firebird Coupe 1989.

For all details visit my site / Pour tout les détails visitez mon site:

http://www.cardomain.com/id/waonfire

Im selling a rebuilt starter and alternator for a 2.8L for $25 dollars(cdn) a piece excluding shipping.

I need a Pass.side Fog light and the driver side running light for a '91 GTA..anyhelp..Needs to be in mint shape not foggy

Actuator relays and isolation relays

1987 front bumber w/ inserts $25
1983 front bumper $25
1983 Rear Bumper (the kind that doesn't have inserts). $25

1985 and 1987 V6 Auto Transmission. $75 each

Recently rebuilt 2.8L heads $50.

set of 15" rims like the gold GTA snowflake?? except they are not gold. three need work one is in very good condition $50 + shipping for the good one $75 for the set for pick-up.

Pics available by request

For sale

-used iroc coil springs(one like new frt iroc one, one good rs frt one)(you pay shipping tho) (1 frt rs one and 1 frt iroc one are 25us plus buyer pays shipping)

-stock side markers (3rd gen camaro) 10bucks shipping incl.

-stock t5 shifter(no ****) $40 shipped

-fuse panel cover (3rd gen camaro) $15 shipped

-3rd gen camaro 2 floor dome light covers $10 shipped


-stock single elec fan for 3rd gen $50 shipping incl.

-orig. 84 fiero owners manual average to used condition for yr $25 shipped

- 2nd gen camaro or firebird power trunk (can be installed on non p/t 2nd gen fbodys) $25 shipped




Wanted to buy
-87 camaro orig. owners manual

-rad air deflector (below rad)

-outside window sweeps/rubbers (no cracks at all)

-centercaps for firebird wheels

-ttop headliner blk or gry (2 of them)

-nose emblem for iroc (mint or new shape)


-mint overflow bottle and washer bottle for camaro


- preamp eq (fits under deck)

better too pm me or email me dont wanna fill up this thread....
Jeff

Want To Buy

- 24mm rear swaybar for my Z28.

combined into older post, see above

Maybe IROCNParts could take some of this stuff off our hands or supply what is needed.

Thanks for the idea. I emailed them, lets see what happens.

Need pass. fog light and driver side cupholder(black).

Thanks!!

I need some #083 heads or alu L98 Heads

must be in Ontario...
Please pm me

I have a ecm chip for a 305. It origionaly came out of a 87 Z28. I recently upgraded to a 5.7 so I got a new chip.

$25.00 obo shipping will be cheap

Dennis

dieseldennis@YOURPANTSshaw.ca
remove YOURPANTS to email me:rockon:

Selling Holley Stealth Ram. Basically Brand new used for maybe 300 miles. Comes with stainless fuel lines for tpi and adjustable regulator. Can come with distributor/wiring harness and ecm if needed. Going with tottaly diff setup.

Also have. Complete tuning package for 90-92 Speed density. Power programmer, akm built cable, p166 laptop, ac/dc convertor, tunercat, datamaster, chip and memcal adapter

Also have roller cam comp cams XE 224/230 w/ 500 lift at 1.5 rockers

Edlebrock 1 5/8" headers for single y-pipe.

Pro Action 180cc ported and polished heads.

B&M 2400 Stall convertor 11"

Not sure on the prices. Hit me at dj@saskmotorclub.com or i can be msn'd at iroc_z_s@hotmail.com

wtb

rear window louvers, either style.
perferrably the ones without the 1986 third brake light hole

PM me

mine got smashed by a basketball

Long time since i've been on this site.

For sale

87 Trans Am GTA 305 5spd artic white

235000 kms

Clutch,starter,alternator,trans mount,all done within 10000 kms tire are virtually brand new

dynomax catback,ads superchip.

decent shape ,paint on front bumper peeling and cracking minor damage to rear quarter panel hit and run while it was in storage.

3500$ obo email if your interested

badassgta@hotmail.com

Got a car.

Check out my site,


http://camaroz28.cardomain.com/id/irocneone

5.7 Litre - 350 V8 - roller mtr - dart heads - port / polished - flattop pist

car converted to carb 750 Holley w/ NOS

car has a t-56 (6spd tranny) - auburn posi unit w/ 3.7.3 gears

3 inch exhaust w/ slp headers and flowmaster muffler

hotchkis suspension (trailing arms, panhard bar trans brace)
GM Motorsport springs

the car looks stock, original paint, I am the original owner

This car is very clean, and in showroom condition. This car has less than 60,000 KM on it and it shows that. The motor has less than 5,000 km

I never drove it in the snow, and never in the rain, nor do I leave it parked for hours outside under the sun. This car has been driven mostly at night, or Sunday Afternoons.

http://camaroz28.cardomain.com/id/irocneone

PLEASE SERIOUS INQUIRES ONLY,
I am looking for the best offer, try me ....
I will consider to seperate the motor and sell the car rolling.
make me an offer...........

i have a set of good used 3:73s for sale for 10 bolt 7.5

$150.00

4 Michelin Arctic Alpins 215/75/15s on used 15" chevy 5-bolt steel rims. Only about 5000 or so km on them, basically new. They fit on my 2.8 '86 SC fine with stock springs (only slight rubbing with wheel cranked), but I don't think they'll fit on my car anymore with the 1.5" drop. I paid about $650 for the whole package. I would be willing to let the tires go on their own for $400 or tires and rims $450. PM or email

Delete

86 Trans am parts

305LG4 Bare block
2 bolt main
good for 335 stroker project
$125 obo

305LG4 cylinder heads 1980 - 1985
fits 1968 - 1986 268ci to 305ci chevy V8's
58cc combustion chamber
1.85 intake valve
1.46 exhaust valve
excellent shape
$50obo

305 LG4 Pistons and connecting rods
good shape
$50 obo for all

305LG4 Camshaft
approx 120,000km
no spun lobes
$25obo

1979 350 Monte Carlo cam
no spun lobes
$25 obo

All items located near Toronto Ontario canada
local pickup only

contact chris
call 905 - 890 5409
or e mail
gino_chris@msn.com

Hey there, I'd be interested in your headlight motors and relays, burnt one of mine out.. Let me know how much!

located in scarborough, 2nd owner 39,000 original kms, very clean inside & out, asking $16,000

Hey people

I need a 3 series carrier for my 9 bolt. I bought one off ebay, but the thing was a P.O.S. not a posi, it was completely warn out!! I kissed $200.00 Cdn goodbye.

Anyway, if you have a GOOD posi 3 series carrier then email or pm I am located in B.C.

Don

WTB

Car is 84 Z28 with LG4 and auto(700R4).


Starter

got my old iroc tail lights ready for sale...i dont need them anymore cuz of my altezza tail light conversion

they were from my 1987 iroc..they are nightshaded black..
i also have a pair of tail light covers for 82-92 camaros..

make me an offer on these things..just sittin around my house..

iroc2nv

Forsale.

Rad for 2.8 Camaro or firebird. It has the cooler for the auto, but will work with manuals. $20

Complete third generation console for firebird. In excellent shape. make me an offer.

Picture upon request. Buyer pays shipping

I just opened the box and set them on the heads and found out they were for standard heads not centrebolt. Summit said I can return them for 10% restock fee.. So if someone wants to give me $260CDN they are yours... if not they go back. part# TFS-31400510 1.5Ratio

Wanted; 85-92 Camaro/Z28/IROC parts cars, or running condition but rough.

Also, 82-92 Firebird, Transam, GTA, Formulas as above.

Or let me know what you have for sale.


Located near London, Ont. 519-285-3777, Scott.

redline@on.aibn.com

Selling my 1985 camaro(need winter car ) it has 190k on it but is running great! I have replaced exhaust from headders back, clutch/flywheel, all brakes, steering pump with high pressure line and more. It is Hugger Orange and the paint is mint.
The rims are not the best looking but that is the only thing wrong(they are gold IROC rims)
IM selling this car cert. and e-tested(no more e-testing) for 3800 obo. Email if interested This_is_a_violation@Hotmail.com

Looking for somewhere to start my project. If anyone has a roller-L98, 400 or 327 short/bare-blocks shoot me a message. Looking to buy hopefully by the end of 2004, so let me know what you go and what you want. Thanks

Colin

looking for 91-92 camaro rims with centercaps in good condiion

Car runs and drives fine, but has the passenger door and post smashed in (t boned yesterday morning). Rear discs, 305 (not HO - but have an HO instrument cluster), 4 speed auto, air induction works, new front calipers. Lots of good parts. $500 and take the whole thing, will not part it out (no space).

905-717-6369 or 905-726-0886

Looking for a set of complete L98

Looking for a set of complete L98 heads. Must have no cracks,

Pm me please!

LB9GTA

sold thanks everyone:lala:

Wanted, any third gen firebird/Trans am project. Just pm me. I'd sort through any that are posted on this page, but it is late. Thank you.


That is, any located in the interior of BC, Vernon preferably.

(Actually, I was going to email the guy right above this post, but umm, gmail seems to not be working right now, but I'll get back to you... Yeah, I know I'm lazy to post a wanted when what I want is actually the post right before mine... anywho)