Card Question ???
Thread Starter
Junior Member
Joined: Jul 2004
Posts: 38
Likes: 0
From: Marshfield,MO
Car: 87 Z28
Engine: 350
Transmission: 350 Turbo
Axle/Gears: 2.73
Card Question ???
I have an 86 z28 that used to have an lg4 and now has a 350 with a non-cc is it. Will not having the ccc on it affect the way my 7000r4 shifts? Or is that not controled by the computer?
Joined: May 2004
Posts: 2,262
Likes: 1
From: houston
Car: 83 POS monte carlo 2015 chevy P/U
Engine: 92 5.7 tpi 5.3
Transmission: 700r4 6L60E
Axle/Gears: 2.42 too high
as long as the TV cable is adjusted right, shifting will be fine.
but the TCC won't work, torque converter clutch lockup, you can look over in the transmission section for ways to get TCC to work
such as this post
https://www.thirdgen.org/techbb2/sho...hreadid=255437
but the TCC won't work, torque converter clutch lockup, you can look over in the transmission section for ways to get TCC to work
such as this post
https://www.thirdgen.org/techbb2/sho...hreadid=255437
Last edited by DENN_SHAH; Aug 17, 2004 at 09:44 PM.
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Joined: May 2004
Posts: 2,262
Likes: 1
From: houston
Car: 83 POS monte carlo 2015 chevy P/U
Engine: 92 5.7 tpi 5.3
Transmission: 700r4 6L60E
Axle/Gears: 2.42 too high
Apeiron
"I'm kind of partial to this thread, myself:"
https://www.thirdgen.org/techbb2/sho...0&highlight=TCC
yes, your's is waaayyy better,.... but you been here longer & im still a n00b
"I'm kind of partial to this thread, myself:"
https://www.thirdgen.org/techbb2/sho...0&highlight=TCC
yes, your's is waaayyy better,.... but you been here longer & im still a n00b
Thread
Thread Starter
Forum
Replies
Last Post