TBI to carb, need part numbers
Thread Starter
Supreme Member
Joined: May 2003
Posts: 1,995
Likes: 0
From: Toledo, OH
Car: 1992 Firebird
Engine: forged 357
Transmission: 700r4, 2200-2400 stall, vette servo
Axle/Gears: stock pegleg 2.73 drum (temp)
TBI to carb, need part numbers
I need a list of everything, and hopefully part numbers, that I need for swapping from TBI to carb. I'm going with an Edelbrock 600cfm carb- please provide me with information on the linkage I will need, and any kind of extra add-ons including fuel line adapters or hoses I need.
I also need the fuel pressure regulator (MAA-4309 Mallory part number) and a fuel pressure guage to go with this... I'd liek to knwo the lockup converter kit for carb too if that's good. Any parts you can list would be GREAT. Thanks a whole bunch.
I love you guys lots
I also need the fuel pressure regulator (MAA-4309 Mallory part number) and a fuel pressure guage to go with this... I'd liek to knwo the lockup converter kit for carb too if that's good. Any parts you can list would be GREAT. Thanks a whole bunch.
I love you guys lots
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
I could use about $20 grand.
I really love you guys, if that helps me get what I want...
Did you check the tech article linked from the TGO home page? It lists all the parts - p/n's you're on your own.
I really love you guys, if that helps me get what I want...
Did you check the tech article linked from the TGO home page? It lists all the parts - p/n's you're on your own.
Thread Starter
Supreme Member
Joined: May 2003
Posts: 1,995
Likes: 0
From: Toledo, OH
Car: 1992 Firebird
Engine: forged 357
Transmission: 700r4, 2200-2400 stall, vette servo
Axle/Gears: stock pegleg 2.73 drum (temp)
Originally posted by five7kid
I could use about $20 grand.
I really love you guys, if that helps me get what I want...
Did you check the tech article linked from the TGO home page? It lists all the parts - p/n's you're on your own.
I could use about $20 grand.
I really love you guys, if that helps me get what I want...
Did you check the tech article linked from the TGO home page? It lists all the parts - p/n's you're on your own.
It fails to mention part numbers for linkages, brackets (if any), etc.
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
Black89TA
Exterior Parts for Sale
9
Jul 23, 2016 10:42 AM
