OK, im building a engine for a freind and looking for a new quadrajet carb on ebay, and I dont have the carb in front of me, so someone might be able to tell me this, does the electronic carbs on the camaro's (1985 Camaro z-28 305) have the straight out the front fuel connection, or the little port that points to the passenger side. And how many electrical connections are on them, one blue on top and one white/off white sort of next to the fuel connection, or just one blue one on top. And also is there any difference in the quadrajets that they put on the trucks and the ones they put on the cars? Thanks, sorry for all the question but im at work and dont have the carb in front of me and i need to know, and i figured all the camaro computer controlled quads were the same, and someone could tell me, thanks!

 

go to my cardomain.com page (click the link in my sig) theres a pic of a quadrajet on the first page 2nd from the bottom. I'd highly recomend going a completly different direction then a quadrajunk.

1987 Chevrolet Camaro - Nick's Chevrolet "Red 5"

 

Sorry, not detailed enough, anyone else?

 

Fuel inlet to pass side
M/C on top pass side front, two pin connector
TPS on driver side front, three pin connector
Little diff. between trucks/cars other than secondary rods/hangers-standard

LG4 rods/hangers (low output camaro) are 'weak' and most other models will be an upgrade.

 

Fuel inlet points to the pass side on mine.