getting quadrajet tuned better
Thread Starter
Junior Member
Joined: Sep 2012
Posts: 1
Likes: 0
getting quadrajet tuned better
Was wondering if anyone could shed some light on how to get my quadrajet to operate a little better.
Carb is new and computerized. 307 olds. I know where the adjustments are. just not what has to be made.
car starts okay, and idles. when i goto drive at first it will lurch and almost go to die, but then cathc itself. as soon as that is over it rides fine. at highway speeds it will run fine and then from time to time it will have a shutter. then smooth out.
how can i eliminate the shuttering and the lurching upon first drive?
Thanks for any help
Carb is new and computerized. 307 olds. I know where the adjustments are. just not what has to be made.
car starts okay, and idles. when i goto drive at first it will lurch and almost go to die, but then cathc itself. as soon as that is over it rides fine. at highway speeds it will run fine and then from time to time it will have a shutter. then smooth out.
how can i eliminate the shuttering and the lurching upon first drive?
Thanks for any help
Joined: Mar 2000
Posts: 43,187
Likes: 46
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Welcome aboard thirdgen.org.
The complete q-jet factory manual is contained in a sticky thread in the top section of this forum. There is also a technical article about improving q-jet performance linked from the thirdgen.org homepage.
The complete q-jet factory manual is contained in a sticky thread in the top section of this forum. There is also a technical article about improving q-jet performance linked from the thirdgen.org homepage.
