Carburetors Carb discussion and questions. Upgrading your Third Gen's carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.

Non GM , but please help

Thread Tools
 
Search this Thread
 
Old Oct 23, 2000 | 07:22 PM
  #1  
88'camaro305TBI's Avatar
Thread Starter
Member
iTrader: (2)
 
Joined: Feb 2000
Posts: 466
Likes: 0
From: Robbinsville NJ
Car: 88 IROC
Engine: 350
Transmission: auto
Non GM , but please help

I just got done changing the spark plugs on my friends 86 honda. It runs a lot smoother, but that wasnt the problem. The car runs for a few seconds and than it dies. As soon as i take off my foot off the gas pedal, it dies. It is carbed and i don't have much experience with carbs. Does this sound like its not getting enough fuel? I checked the fuel filter, and there is plenty gas on both sides of the filter. I don't want to mess with tweaking the carb, cause its been never touched before.

This problem happened after the car has not been running for a week.
Thanks for any help

------------------
Mods:Hooker Aerochamber 3" exhaust, gutted kitty,
March 2 piece underdrive pullies, smog pump gone,;these two made a very noticable difference.
14x4 K&N open air element filter-the best mod so far
Eibach springs with KYB's all around.
Appearance: Harwood cowl hood, Z-28 wing, painted black(7/20/00)-original color was light blue
*All these mods were made this year
Stock Options:117,000 miles on motor, 5spd, TBI, 305, T-tops
Run a best of 16.7 @85mph with traction problem. Have to try again sometime.
Reply
Old Oct 23, 2000 | 09:28 PM
  #2  
merf23's Avatar
Member
 
Joined: Dec 1999
Posts: 311
Likes: 0
From: waterford, CT 06385
its possible that some H2O got in the gas from sitting. Maybe try some dry gas in there if you dont think there is a mechanical problem. ?vacuum leak
Reply
Old Oct 24, 2000 | 10:04 AM
  #3  
88'camaro305TBI's Avatar
Thread Starter
Member
iTrader: (2)
 
Joined: Feb 2000
Posts: 466
Likes: 0
From: Robbinsville NJ
Car: 88 IROC
Engine: 350
Transmission: auto
what do you mean by dry gas? you mean pouring gas directly through the air intake?
Reply




All times are GMT -5. The time now is 01:36 PM.