Intake port for aftermarket temp gauge
Thread Starter
Junior Member
Joined: Aug 2016
Posts: 6
Likes: 0
Intake port for aftermarket temp gauge
I'd like to run an aftermarket temp gauge and don't lose the stock gauge also. Would this port work? It's next to the thermostat housing. Emissions already ditched and also running non-CCC carb/dizzy.
Joined: Dec 2004
Posts: 16,753
Likes: 996
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: Intake port for aftermarket temp gauge
That will work or you should have a Npt plug on your passengers side cylinder heads between cylinders 6 & 8.