can the ECM be told via the prom to turn the second fan on

Reply Subscribe

Thread Tools

Search this Thread

May 2, 2005 | 05:56 PM

BOTTLEDZ28

Thread Starter

Supreme Member

iTrader: (9)

Joined: Sep 1999

Posts: 3,871

Likes: 24

From: Mass

Engine: 350 TPI

Transmission: A4

Axle/Gears: 3.23

can the ECM be told via the prom to turn the second fan on

I have a 91 Z28 w/ dual fans and I have removed my A/C and now the second fan is useless unless I run a manual switch. Is there a way that the prom can be programmed somehow to turn that second fan on at the same time the primary fan comes on. That would be so much easier then running a wires all over the car for a manual switch. I have a custom prom from FASTCHIP if it matters

May 2, 2005 | 11:41 PM

gta324

Supreme Member

Joined: Aug 1999

Posts: 2,441

Likes: 1

From: sweden

Car: GTA -89

Engine: Blown 415"

Transmission: 4L80E

Axle/Gears: Strange 12-bolt

I think so, search in the DIY prom area!

/N.

May 4, 2005 | 11:45 AM

MikeH

Supreme Member

iTrader: (10)

Joined: Jul 1999

Posts: 1,780

Likes: 2

From: Fla

Car: 90 IROC

Engine: 406

Transmission: GMPP 93/4L60

Axle/Gears: 9 bolt 3.27

Yeah its easy (thanks Glenn) you just have to switch pins at the computer harness. Then just set the temps you want the fans to kick on and off. Might be better to have them come on one at a time. So as not to have to much of a load on the system as they kick on.