memcal difference akfs 2194 apyu 3516
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Jan 2012
Location: Clark NJ
Posts: 877
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1988 Pontiac Transam GTA Notchback
Engine: 2003 Chevy 5.3 Vortec (325 cu)
Transmission: 4L60E
Axle/Gears: 3.27
memcal difference akfs 2194 apyu 3516
I got a question about memcals. My car was originally a 305 (it's an 88 and its got VATS), a swap was done to a 350 in the 90's. The memcal retained was AKFS 2194, the 305 memcal. I recently found a memcal APYU 3516 and put that in the ecm. (disconnected ecm, put it in chip, reconnected) That memcal is for an 89 also with VATS.
I know that in 89, they eliminated the cold start injector. My question is what else changed? And with this "new" chip in the ecm, she would stall out at red lights and in reverse unless I tapped the gas a little. The base timing was adjusted, but I still can't get her to run correctly and on her own without stalling. Is it because there is a difference in programming for an 88 5.7 memcal and an 89 5.7 memcal?
help is greatly appreciated.
I know that in 89, they eliminated the cold start injector. My question is what else changed? And with this "new" chip in the ecm, she would stall out at red lights and in reverse unless I tapped the gas a little. The base timing was adjusted, but I still can't get her to run correctly and on her own without stalling. Is it because there is a difference in programming for an 88 5.7 memcal and an 89 5.7 memcal?
help is greatly appreciated.
Thread
Thread Starter
Forum
Replies
Last Post