What memcal do I use?

Subscribe
May 20, 2002 | 09:03 AM
  #1  
After all of the reading I have done, I have determined that I need to scrap my $32 bin and change over to a $6E bin, this would be to delete my cold start, etc, etc, etc.

My question is this,
What memcal would I use for a 89 camaro, 5.7L, and Auto setup?
APYP - searching the archives, said that this is for a vette w/6-speed
APYU - Didn't find much on it
AUJM - Didn't find much on it
Reply 0
May 20, 2002 | 11:42 AM
  #2  
You want to use ARAP which is 6E code

APYU - L98 5.7L, 700R4 (auto), 3.27 rear, not sure what code

AUJM - L98 5.7L, 700R4 (auto), 3.27 rear, 6E Code

ARAP - L98 5.7L, 700R4 (auto), 3.07 rear, used in CORVETTE, 6E code
Reply 0
May 20, 2002 | 12:58 PM
  #3  
Re: What memcal do I use?
Quote:
[/B]
ARAP, but you have to make a few changes, lots of info in the archives on it.
Reply 0
May 20, 2002 | 01:05 PM
  #4  
Re: Aha
I will start searching, thanks guys!!
Reply 0
Subscribe