ok i know absolutly nothing about proms but im going from the stock 305 TBI that came with my 89 RS to a built 350 TPI that will be pushing 350-375 hp...someone mentioned something about a prom i was just wondering what im going to have to do. thanks for any input:
:hail:

 

I'll say it before anyone else, make sure you read traxion's article at the top of the page on getting started. That'll tell you everything you need to know. After that, go to diy-efi.com (.org?) and read their archives (they're long and a lot of them don't pertain to what you need, but there is good info). Then, come on back and check stuff out...

For your swap though you need the computer from the TPI car, the setup obviously, the wiring harness, injectors, a 350 knock module, and probably ESC stuff. There are definatly help articles on this swap...

-=-Mike