7749 tuning tips/FAQ
Thread Starter
Junior Member
Joined: Jul 1999
Posts: 75
Likes: 0
7749 tuning tips/FAQ
i see a few people are/have switched to the 7749 ecu/$58($60) code.
im amost to the point where i can start and tune me car. i have searched and figured it would be nice to post a FAQ for myself and others.
Installing the GM 1227749
TunerPro
TunerPro ALDL Datastream Definition (Right-Click "Save As")
7749 ECU Definition (Right-Click "Save As")
feel free to add anything. ill be posting more when i get a chance.
im amost to the point where i can start and tune me car. i have searched and figured it would be nice to post a FAQ for myself and others.
Installing the GM 1227749
TunerPro
TunerPro ALDL Datastream Definition (Right-Click "Save As")
7749 ECU Definition (Right-Click "Save As")
feel free to add anything. ill be posting more when i get a chance.
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Moderator
Joined: Feb 2000
Posts: 7,015
Likes: 2
From: Schererville , IN
Car: 91 GTA, 91 Formula, 89 TTA
Engine: all 225+ RWHP
Transmission: all OD
Axle/Gears: Always the good ones
Leave it here for now. Will consolidate it later and post anything anyone adds/contriubutes under the tuning hints and articles by ecm sticky above.
Good work guys
later
Jeremy
Good work guys
later
Jeremy
Last edited by 3.8TransAM; Aug 4, 2004 at 01:29 AM.
Joined: Jul 1999
Posts: 12,088
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Rbob was kind enough to link some of this stuff in the ecm specific sticky above.. Perhaps him, or 3.8 will add any new info.
I've been tinkering with Bruces $60 code in a high level way. I don't wanna let the cat outta the bag right now, especially if the project fails but.. Hopefully soon i'll have something for you non assembler programming folks. (hint, hint).
-- Joe
I've been tinkering with Bruces $60 code in a high level way. I don't wanna let the cat outta the bag right now, especially if the project fails but.. Hopefully soon i'll have something for you non assembler programming folks. (hint, hint).
-- Joe
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
Originally posted by anesthes
I've been tinkering with Bruces $60 code in a high level way.
I've been tinkering with Bruces $60 code in a high level way.
Thread Starter
Junior Member
Joined: Jul 1999
Posts: 75
Likes: 0
Originally posted by anesthes
Rbob was kind enough to link some of this stuff in the ecm specific sticky above.. Perhaps him, or 3.8 will add any new info.
I've been tinkering with Bruces $60 code in a high level way. I don't wanna let the cat outta the bag right now, especially if the project fails but.. Hopefully soon i'll have something for you non assembler programming folks. (hint, hint).
-- Joe
Rbob was kind enough to link some of this stuff in the ecm specific sticky above.. Perhaps him, or 3.8 will add any new info.
I've been tinkering with Bruces $60 code in a high level way. I don't wanna let the cat outta the bag right now, especially if the project fails but.. Hopefully soon i'll have something for you non assembler programming folks. (hint, hint).
-- Joe
and taking 3 programming classes this term in school i really havent had that much time to learn ASM..
need a beta
Joined: Jul 1999
Posts: 12,088
Likes: 125
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Originally posted by Grumpy
That's nice to hear. This is the first mention of anyone doing anything with it.
That's nice to hear. This is the first mention of anyone doing anything with it.
-- Joe
