TunerPro to Promgrammer conversion
Supreme Member
Joined: Aug 1999
Posts: 2,441
Likes: 1
From: sweden
Car: GTA -89
Engine: Blown 415"
Transmission: 4L80E
Axle/Gears: Strange 12-bolt
Just change the tdf file in tunercat editor program to match the formula.
BPW vs EGR
The correct formula is: BPC = 730.75 * (vol of 1 cyl / inj flow in gms per sec)
Steve, try this for BPC calc:
BPC = 730.75 * (VOL / RATE)
; VOL = Vol of 1 Cylinder in liters
; RATE = Injector flow in gms/sec
;
; gms/sec = (lbs/hr / 3600) * 453.6
Changes in tunercat editor
Edit step size 1
Minimum Table value 0
Maximum table value 255
Scale factor 1
BPW vs EGR
The correct formula is: BPC = 730.75 * (vol of 1 cyl / inj flow in gms per sec)
Steve, try this for BPC calc:
BPC = 730.75 * (VOL / RATE)
; VOL = Vol of 1 Cylinder in liters
; RATE = Injector flow in gms/sec
;
; gms/sec = (lbs/hr / 3600) * 453.6
Changes in tunercat editor
Edit step size 1
Minimum Table value 0
Maximum table value 255
Scale factor 1
Thread
Thread Starter
Forum
Replies
Last Post
