explain AE-MAP
explain AE-MAP
seems AE TPS %'s in my tunercat program are understood by me.
what i do not understand is how the AE MAP works.
i see 0-20-40-60-80 values.
if i am cruising at 2000 rpms/ 30 map and i invoke AE and resulting MAP goes to say 60 is the value in AE 20-40 MAP inputted in addition to the % change quantity thay TPS AE provides? usec from tps + usec map = net AE? i stated earlier i used to see a double spike in my logs when AE is involved and i assumed first was tps and second map.
what i do not understand is how the AE MAP works.
i see 0-20-40-60-80 values.
if i am cruising at 2000 rpms/ 30 map and i invoke AE and resulting MAP goes to say 60 is the value in AE 20-40 MAP inputted in addition to the % change quantity thay TPS AE provides? usec from tps + usec map = net AE? i stated earlier i used to see a double spike in my logs when AE is involved and i assumed first was tps and second map.
Joined: Apr 2004
Posts: 3,180
Likes: 3
From: Browns Town
Car: 86 Monte SS (730,$8D,G3,AP,4K,S_V4)
Engine: 406 Hyd Roller 236/242
Transmission: 700R4 HomeBrew, 2.4K stall
Axle/Gears: 3:73 Posi, 7.5 Soon to break
There's a good thread under the tuning guide called
"AE TPS vs. MAP How to Discern"
lots of goooood stuff there
"AE TPS vs. MAP How to Discern"
lots of goooood stuff there
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
