DIY PROM Do It Yourself PROM chip burning help. No PROM begging. No PROMs for sale. No commercial exchange. Not a referral service.

What cable/scan tool/software do I need?

Thread Tools
 
Search this Thread
 
Old Sep 21, 2000 | 02:26 PM
  #1  
lexussc94's Avatar
Thread Starter
Member
iTrader: (2)
 
Joined: Feb 2000
Posts: 221
Likes: 0
From: NY
What cable/scan tool/software do I need?

I have an 85 tpi iroc and was wondering what scan tool to go with. i have a laptop but need software and a cable. Please help! thanks, Mike
Reply
Old Sep 21, 2000 | 03:12 PM
  #2  
TRAXION's Avatar
Supreme Member
 
Joined: Jul 1999
Posts: 2,844
Likes: 4
From: Maryland
Car: 2005 Subaru STI
Engine: 153ci of Turbo Power!
Transmission: 6-Speed
Mike,

There are many scan tools available. See the first installment of the PROM burning article in the tech section. Its at the end of the article. HOWEVER, in Pablo's own words, don't waste your money. Your ECM has a very slow baud rate (160). This means that it does not send as many electronic updates through the ALDL port. I think that you might get one every 2 seconds (or something like that). If you feel that you 'need' a scan tool then go for one of the cheaper ones that updates every second instead of one of the more fancy ones that updates about 10 times a second. A good choice would be an AutoXRay or to download free software from the internet and buy a cable from AKM.

Tim

------------------
TRAXION's 1990 IROC-Z
Best Time = 12.587 @ 107.97mph (1.710 60ftr) on the long runner setup.
All Natural. No Force. No Drugs. Stock Bottom End. Stock Body Panels. Stock Wheels. No Weight Reduction.
Gunning for NA 11's with the MiniRam II and Hooker LT Headers.
-=ICON Motorsports=-
Moderator: PROM board at thirdgen.org
Reply
Old Sep 21, 2000 | 04:20 PM
  #3  
lexussc94's Avatar
Thread Starter
Member
iTrader: (2)
 
Joined: Feb 2000
Posts: 221
Likes: 0
From: NY
THANKS FOR THE INFO TIM
Reply




All times are GMT -5. The time now is 11:09 AM.