I've always heard that they flow more than 24# because they are tested at a lower fuel pressure. So what should we put for injector flow rate?? 26#??

------------------
355 10:1 , AFR 190 heads, LT4 HOT cam w/ 1.6 roller rockers, complete Superram intake, 58mm BBK TB, 24# injectors, screens out of MAF, MAT relocated, March underdrive pulleys, Streetdampner, Crane HI-6 ignition, 160 thermostat, K&Ns, TES headers(Jet hot coated), Mufflex 4' cat back, B&M shift Kit, 2500 converter, and 3.27s.

 

The info I have says:

Ford SVO 24# injectors

24# @ 38.5 psi
26# @ 45 psi
27.4 # @ 50 psi
28.6 # @ 55 psi


------------------
Dan
LPE built 383 A/T Package

 

http://www.rceng.com/technical.htm


injector calculations there