Starting .Bin for 88 GTA

Reply Subscribe

Thread Tools

Search this Thread

Aug 27, 2006 | 04:51 PM

Hawk92z-TDZ

Thread Starter

Supreme Member

Joined: Jan 2003

Posts: 1,323

Likes: 0

From: Arthur, Ontario, Canada

Car: 92Z28, 99SS, 83Z28 & 86GTA

Engine: 421, LS1, 327Turbo & 383

Transmission: T-56, 4L60E, T5 & 4L60

Axle/Gears: 4:10, 3:42, 2:73 & 3:27

Starting .Bin for 88 GTA

Need a good starting bin for a 88 GTA Manual car, car is a 383 with HSR with a TKO600

One of the vette bin's should be a good start no? Bin name?

All I can find sofar is automatic bin's, not manual

Aug 27, 2006 | 10:51 PM

3.8TransAM

Moderator

Joined: Feb 2000

Posts: 7,015

Likes: 2

From: Schererville , IN

Car: 91 GTA, 91 Formula, 89 TTA

Engine: all 225+ RWHP

Transmission: all OD

Axle/Gears: Always the good ones

Start reading now.

Its your only choice and chance :-)

Hit the stickies up top and take a look around and search for what other members have done.

Always start with the closest applicable factory bin to your setup.

later
Jeremy

Aug 28, 2006 | 06:42 AM

Hawk92z-TDZ

Thread Starter

Supreme Member

Joined: Jan 2003

Posts: 1,323

Likes: 0

From: Arthur, Ontario, Canada

Car: 92Z28, 99SS, 83Z28 & 86GTA

Engine: 421, LS1, 327Turbo & 383

Transmission: T-56, 4L60E, T5 & 4L60

Axle/Gears: 4:10, 3:42, 2:73 & 3:27

I just need the bin name of a manual for 88, I cant find one

The TPI is out of a 88 Auto GTA, its now in a 67 RS/SS Camaro

What one of these is for a 88 Manual Vette? Or a 88 Manual F-body?

Aanl4045 32.bin
Aanm 32.bin
ABTB0315 32.bin
Abtd 32.bin
Abtf0735 32.bin
ABTM 32.bin
ABTP 32.bin
ABTR 32.bin
Abtr4763 32.bin
ABTU 32.bin
ABTZ 32.bin
Abuamt 32.bin
abwt 32.bin
abwt88ta 32.bin
ABWW 32.bin
acxs 32.bin
acyc1135 32.bin
akfm2174 32.bin
Ama8848 32.bin
AMJ 32.bin
ASME516O 32.bin
aum0122 32.bin
AZSP 32.bin
Bua2 32.bin
Bua 32.bin
BUA1728 32.bin
BUA9340 32.bin

Last edited by Hawk92z-TDZ; Aug 28, 2006 at 06:49 AM.

Aug 28, 2006 | 03:32 PM

Desert86Roc

TGO Supporter

Joined: Jul 1999

Posts: 607

Likes: 0

What editor are you using? If you have aluminum heads, you can start with the ARAP bin, and just flip the bit for manual vs automatic. Also, if you had read the tech article on prom tuning, you could find out more information like the location of the bin library at ftp://ftp.diy-efi.org/pub/gmecm/bin_...%206E%2094/6E/

Last edited by Desert86Roc; Aug 28, 2006 at 03:37 PM.