Can I get a .bin!!!!
Thread Starter
Member
Joined: Sep 2000
Posts: 147
Likes: 0
From: Oakville,Ontario, Canada
Can I get a .bin!!!!
I just downloaded a tuner and want to play around but I don't have a way of getting the bin off my prom so can some one send me a copy of theirs so I can test the software out. Send it to mattk132@hotmail.com
------------------
1988 IROC-Z T-Top "MATTSTOY"
350 Crate engine
370ft. lb Torque STOCK
5speed Centerforce clutch, Spohn Sub-frames, Jamex 1.5 Lowering springs, 2 1/2' Exhaust,ram air setup
------------------
1988 IROC-Z T-Top "MATTSTOY"
350 Crate engine
370ft. lb Torque STOCK
5speed Centerforce clutch, Spohn Sub-frames, Jamex 1.5 Lowering springs, 2 1/2' Exhaust,ram air setup
Member
Joined: Mar 2000
Posts: 331
Likes: 0
From: Centerline, MI 48015
Before you get in trouble for not thoroughly reading the Prom Burning Introduction article, hurry up and go to www.diy-efi.org/gmecm and get yourself a BIN!
Member
Joined: Oct 1999
Posts: 297
Likes: 0
From: Uppsala, Sweden
Car: Camaro IROC-Z '89
Engine: 350 TPI /w Procharger P1SC
Transmission: TH700R4 with Transgo shiftkit
Axle/Gears: 2.77 Borg Warner
<font face="Verdana, Arial" size="2">Originally posted by matty350TPI:
I just downloaded a tuner and want to play around but I don't have a way of getting the bin off my prom so can some one send me a copy of theirs so I can test the software out. Send it to mattk132@hotmail.com
</font>
I just downloaded a tuner and want to play around but I don't have a way of getting the bin off my prom so can some one send me a copy of theirs so I can test the software out. Send it to mattk132@hotmail.com
</font>
http://www.area51.org.il/~zaphodb/gmecm/anyj9304.bin
------------------
ZaphodB a.k.a Carl Andersson - zaphodb@faxancruisers.org
'89 Camaro IROC-Z 5.7L TPI - Mods under construction :-)
Custom ARAP Chip Under Development/180 t-stat, Edelbrock TES Headers,
SLP Airfoil, K&N Filters, Accel 8mm wires, Relocated MAT, AFPR @ 45 PSI
Thread
Thread Starter
Forum
Replies
Last Post
