Hey Grumpy--? about WOT delay on 16147060
Thread Starter
Junior Member
Joined: Sep 2001
Posts: 82
Likes: 0
From: Woodlands, Texas, USA
Hey Grumpy--? about WOT delay on 16147060
This actually was intended for prscarf.
Saw your previous post about wot delay in your 4x4. I have the same ECM in my truck and was looking at a bin I downloaded from Internet. I don't have mine copied from my truck yet, but once I do I'll use it to start from.
The bin I have has 110 second's wot delay according to tunercat.
Is that what your's started with? Seems like a huge delay. Did you change it?
Thanks in advance
[This message has been edited by davidjon_99 (edited September 05, 2001).]
Saw your previous post about wot delay in your 4x4. I have the same ECM in my truck and was looking at a bin I downloaded from Internet. I don't have mine copied from my truck yet, but once I do I'll use it to start from.
The bin I have has 110 second's wot delay according to tunercat.
Is that what your's started with? Seems like a huge delay. Did you change it?
Thanks in advance
[This message has been edited by davidjon_99 (edited September 05, 2001).]
Supreme Member
Joined: Jun 2000
Posts: 7,554
Likes: 1
From: In reality
Car: An Ol Buick
Engine: Vsick
Transmission: Janis Tranny Yank Converter
<font face="Verdana, Arial" size="2">Originally posted by davidjon_99:
Saw your previous post about wot delay in your 4x4. I have the same ECM in my truck and was looking at a bin I downloaded from Internet. I don't have mine copied from my truck yet, but once I do I'll use it to start from.
The bin I have has 110 second's wot delay according to tunercat.
Is that what your's started with? Seems like a huge delay. Did you change it?
Thanks in advance</font>
Saw your previous post about wot delay in your 4x4. I have the same ECM in my truck and was looking at a bin I downloaded from Internet. I don't have mine copied from my truck yet, but once I do I'll use it to start from.
The bin I have has 110 second's wot delay according to tunercat.
Is that what your's started with? Seems like a huge delay. Did you change it?
Thanks in advance</font>
Anyway, yes that is a long time.
I'm not sure about you application and useage, but there is a rpm bypass that eliminates that. Setting it to like say 1,800 rom , or just over stall speed should work OK. You can set it down, also. On some of the truck stuff they have it so you can't lug the engine down too quickly like when rock crawling.
Thread Starter
Junior Member
Joined: Sep 2001
Posts: 82
Likes: 0
From: Woodlands, Texas, USA
<font face="Verdana, Arial" size="2">Originally posted by Grumpy:
My 4x4?. Ya lost me on that one.
Anyway, yes that is a long time.
I'm not sure about you application and useage, but there is a rpm bypass that eliminates that. Setting it to like say 1,800 rom , or just over stall speed should work OK. You can set it down, also. On some of the truck stuff they have it so you can't lug the engine down too quickly like when rock crawling.
</font>
My 4x4?. Ya lost me on that one.
Anyway, yes that is a long time.
I'm not sure about you application and useage, but there is a rpm bypass that eliminates that. Setting it to like say 1,800 rom , or just over stall speed should work OK. You can set it down, also. On some of the truck stuff they have it so you can't lug the engine down too quickly like when rock crawling.
</font>
I should have directed my question to prscarf. Thanks for the info though.
Thread
Thread Starter
Forum
Replies
Last Post
