I am posting this to see if there is enough interest in putting together a group purchase for AT29C256 and ZIF sockets. 15 or more will cost $4.20 each for the chip and $7.53 each for the socket. I would like to place this order by Labor Day if possible. Please let me know if you want to get in on this.



------------------
Dan
1987 Monte Carlo LS
357 TPI
3.42 rear
I'll get to the track one of these days

 

No need for ZIF sockets with that chip. Just solder it right in the memcal. That's what I did and I have burned it 50+ times already.

Jason

 

Depends on application.
On my ROMless 148 I have to run them. Ony one using the ROMless 747s needs them also.

Are those sockets gold plated and with a *lift up* lever?.

 

I will have to check on the sockets but I believe they are the lift up type. I will let you know.

------------------
Dan
1987 Monte Carlo LS
357 TPI
3.42 rear
I'll get to the track one of these days

 

Yeah, I would be in for 3 or 4 of the PROMS..

No sockets needed here either


------------------
-=Jeff=-
89 Corvette Coupe White with Black Grand Sport Stripe
-=ICON Motorsports=-
Check out my mods on My '89 Vette

 

I'm in. I need 3 proms and maybe 1 socket. Need details on the socket to decide.

------------------
1988 L98
Vette Heads/no EGR
SLP Headers/Y-Pipe
ARAP bin

 

I am in for 3 chips and 1 socket. thanks for doing th GP. Mike

------------------
90'GTA L98
Blk/Blk leather
355-4 bolt aluminum heads
10/1 forged pistons
comp cams 510 lift 220/230 @.050 114 LSA full crane gold RR,
1 3/4" SLP headers
ported lower/SLP runners 52mm TB, 24# SVO inj.
chip modified by ME
T700R4 rebuilt by ME.
all the trick stuff. superior shift kit. Fairbanks 9 clutch-noburn/.5" TV boost/Vette servo/Kevlar band/all new bushings etc.etc.etc.

 

You know I'm in for some! I figure 5 chips and maybe one socket holder depending on the spec.

 

I'm just getting the equipment to start burning chips, so count me in for 3 chips.

Sparks a flyin'

 

OK, Here's some info on the socket. The one that I quoted the price on is a lever type tin plated socket. I have also found a gold plated version but it is $12.49 for QTY 1-24; 25 and more the prices drops to $10.93

So far I have requests for about 14 chips and 3 sockets.

I plan on placing the order September 4th.

I will try to keep everyone updated.

 

Do you think the gold plating on the socket is nessary?

------------------
1988 L98
Vette Heads/no EGR
SLP Headers/Y-Pipe
ARAP bin

 

I don't think the gold plated is necessary but sme people had asked so I got pricing on both.

Dan

 

mark me down for one socket, the cheaper one.

total for me:
3 proms
1 socket

Thanks for setting this up!

------------------
1988 L98
Vette Heads/no EGR
SLP Headers/Y-Pipe
ARAP bin

 

I now have requests for 17 Chips and 5 sockets. I will probably place the order next Tuesday. I will e-mail all interested parties over the next couple of days to confirm everything.

Thanks,
Dan

 

Dan,

I will take 2 Sockets (non Gold).

Bob Wooten


[This message has been edited by Bobalos (edited August 28, 2001).]

 

I want 3 Chips and I Socket. E-Mail me at ghosthunter8@excite.com
Got Tunercat, EASE, and Pocket Programmer and all I need is some chips. 15 more pages to go and I will have read all the post on this board.
Thanks

[This message has been edited by Z_Ghost (edited August 29, 2001).]

 

Dan,
Pleae put me down for 2 chips and one non-gold socket.
Thanks,
Dave

 

Just to update my order I would like to order: 2 ZIF sockets
6 Chips

Also do you take Paypal? If so that would be a great way for everyone to pay you. I use it all the time. I(we) would need to add 3% though to make up for the Paypal fee.

Thanks again!

 

Here's the latest Group Purchase Status.

I have requests from the following people
Name Chips Sockets
DSouthern 2 1
Z-Ghost 3 1
Bobalos n/a 2 socket only
sparks383iroc 3 n/a
BLOWN85/TA 6 2
MrMike99 3 1
z28dan 3 1
-=Jeff=- 3 or 4 n/a
Frank R. 5 1
Hector 4 1
Daniel C. n/a 2


If I have missed anyone please let me know.

Dan

------------------
Dan
1987 Monte Carlo LS
357 TPI
3.42 rear
TES headers, Dynomax catback, ported plenum, AFPR

[This message has been edited by MrDano (edited September 03, 2001).]

 

I have just placed the order and should receive the chips and sockets Wednesday Sept. 12th.

Once I have everyone's shipping address I will figure out the total costs with shipping for each of you. The chips cost $4.20 each and the sockets are $7.75(sorry about the rise in cost but the manufacturer raised their pricing on Sept.1 and I only found that out today when I ordered)

I have ordered 4 extra chips and 2 extra sockets in case anyone is interested.

I will accept payment by PayPal or Money Order. Personal checks will need to wait until they clear the bank.




------------------
Dan
1987 Monte Carlo LS
357 TPI
3.42 rear
TES headers, Dynomax catback, ported plenum, AFPR

 

I'm in for 3 proms.


spidermens@mediaone.net

 

I would like to be put down for the 1 extra chip you ordered. I would like 3 total if anyone backs out of the deal. Thanks



------------------
[b]Jason "TrickFlow" Zajac/b]

JnJSpdShop@aol.com

 

Just want to update everyone. The parts finally arrived on Friday. I will be going through everything tonight and will start figuring out shipping charges to each of you.

If you have not sent me your address please send it so I can get all the shipping charges figured out.

Thanks,
Dan

 

I am confused?? why pay for the chips when you can go to the atmel web site and order samples they cost ....oh ya they are samples so they are free no shipping nothing. I just got 6

I am in no way advising any one to lie on the order form but it helps if you say you plan to use lots in the future and you are a design engineer for a large company

 

Hmmmm...I really want a Corvette, maybe I will just go get a "free sample". Any way you cut it that is stealing in my book. IMO

 

sorry it was just a sujestion

and if you do find a way to get the corvette for free please let me know I will take 2 LOL