anybody?

trying to get some more information than what i already have

http://www.diy-efi.org/diy_efi/projects/diy_wb/

heres a link

 

Soldered one up couple months ago, and it's a neat tuning tool.
Need more infor., the last 4 years of archives in the DIY_EFI explains it all.

 

I was looking at this also. I've lookat at the link and read a lot of the archives but there doesn't seem to be any pictures of etching masks for the PC board nor a PC board layout database.

Did I just overlook them or are they somewhere else?

 

There is a group buy on for boards for the 3rd time now. Last batch were $3.15 each

 

if you guys want to get in on it, get hopping. even if you are not sure if you want to do it now, get the PCB & hold onto it. it wont spoil, but you might not get another crack @ it for a while.

BW

 

doesn't really matter.....isn't very hard to build

soldering iron, trip to radio shack, and a few hours

 

At that price, it is just not worth trying to breadboard one up from scratch. I'm in for 3. One for reference, one for experiments, and one for 89ProchargedROC in case he changes his mind.

Who do I talk to?


[This message has been edited by Sideways (edited October 19, 2001).]

 

I ordered 2

------------------
, Jon (350 TBI!)
91 Red My website

 

Pay attn girls, here it is.

"We're doing one more group buy on the DIY-WB boards. If you got closed out of the 1st batch, and missed the 2nd buy then here's your last chance. Again this is for the board only, no parts kit, no sensor. There is no open group buy for parts kits, but the parts list is very well detailed on the DIY-WB page, http://www.diy-efi.org/diy_efi/projects/diy_wb The group buy will end October 25th (10/25). This is not Ebay, do not wait until the last minute to order! Boards will cost $4 to $9 each depending on total quantity ordered. Expect shipping to begin sometime after 11/7."

The signup is at http://208.37.117.207/wborder.html

- Bob Valentine
- wideband@tecmark.com