I was wondering if anyone has figured how to tune specific BL cells, with a 165 ecm and MAF setup. I am trying to get my light load and idle BLMs closer to 128. From scan data, I am at very low airflow, <10 gm/sec, and usually at cell 0 for idle. I was running in the low 120s, but been slowly tweaking MAF table #1 values down by 0.1 gm/sec, and making things linear, getting some improvment to BLM. I'm thinking this table is all I can do to affect cell 0 blms.

Just wondering what all other folks doing.

You're on the right track. As I've learned, the MAF tables are really the first and foremost tables to dial in.