Data logging and the 7060
Thread Starter
Junior Member
Joined: Aug 2010
Posts: 8
Likes: 0
From: Wisconsin
Car: 80's buicks and a Suburban
Engine: 454 with a N* DIS
Transmission: 6 speed ZF manual
Axle/Gears: 14B FF 3:73 33x12.5
Data logging and the 7060
Hey all,
Ive finally got the ZF 6 speed installed in the truck. The truck is a 93 Suburban 7.4L, CC266 roller, N*DIS Ignition, ZF-6 Speed Man, 7060 ECM. After a few changes to the AWWH $85 bin This thing RUNS
Ive been tuning this thing By ear as I can not get the data stream to work. Im using An Auto Prom and the only known ADS file(138,177). it will connect when set at 160 Baud with no information and will not connect at all when set to 8192. I need this to Fine tune as I still have some misc. misfires and a small rich sneeze @1200 RPM any suggestions?? Ive searched thoughly 
Thanks
Ive finally got the ZF 6 speed installed in the truck. The truck is a 93 Suburban 7.4L, CC266 roller, N*DIS Ignition, ZF-6 Speed Man, 7060 ECM. After a few changes to the AWWH $85 bin This thing RUNS
Ive been tuning this thing By ear as I can not get the data stream to work. Im using An Auto Prom and the only known ADS file(138,177). it will connect when set at 160 Baud with no information and will not connect at all when set to 8192. I need this to Fine tune as I still have some misc. misfires and a small rich sneeze @1200 RPM any suggestions?? Ive searched thoughly Thanks
Thread
Thread Starter
Forum
Replies
Last Post
