new to tuning
Thread Starter
Junior Member
Joined: Jul 2011
Posts: 10
Likes: 0
new to tuning
Ok im new to this board and new to tuning so I hope you guys can give me some advise to get me started.
Here is what I have, 87 iroc with a 4 bolt 355, holley stealth ram, 30lb injectors, comp 305h, ported sportsman2 heads, speedpro pistons, 350 turbo with manual valvebody, 3200 stall, 7.5 rearend with 373's and mini spool (I know im gonna break the rear end, ive done it manys times on the old engine) but it works for now.
Ive been playing around tuning but don't seem to be getting anywhere trying to modify my stock settings. I can make the car run good I know im way off on the tune. I was wondering if anyone knew what bin file would maybe be a good starting point to work with on my combination. Or any advise to point me in the right direction would be greatly apreciated. I had my old slp setup working great but the hsr and big cam are making it hard for me to get it right.
Thanks, Chris
Here is what I have, 87 iroc with a 4 bolt 355, holley stealth ram, 30lb injectors, comp 305h, ported sportsman2 heads, speedpro pistons, 350 turbo with manual valvebody, 3200 stall, 7.5 rearend with 373's and mini spool (I know im gonna break the rear end, ive done it manys times on the old engine) but it works for now.
Ive been playing around tuning but don't seem to be getting anywhere trying to modify my stock settings. I can make the car run good I know im way off on the tune. I was wondering if anyone knew what bin file would maybe be a good starting point to work with on my combination. Or any advise to point me in the right direction would be greatly apreciated. I had my old slp setup working great but the hsr and big cam are making it hard for me to get it right.
Thanks, Chris
Thread
Thread Starter
Forum
Replies
Last Post