BPWvsLoad look right?
Thread Starter
Member
Joined: Aug 2006
Posts: 484
Likes: 0
From: Tampa, FL
Car: 1988 Iroc-Z Red T-tops
Engine: 305 TPI LB9 55k miles
Transmission: Auto 700r4
Axle/Gears: 2.73 posi
BPWvsLoad look right?
Finally got what I think is my first clean read and on my way to start tuning!
165ECm akfm2174.bin 1988 iroc 305 tpi auto 2.73 stock do my numbers look in order for the stock read? I looked at some others online and my values appears little higher across the board, maybe cause i am 305 vs 350 from others i have saw?
The read I pulled from TP was using the 27SF512 chip setting with the offset of
chip 00C000-00FFFF
buffer 00000-003FFF
I plugged my stock memcal into the HDR and APU1 and read successful. Is that ok? Did I have to use a 29C or read only chip setting?
165ECm akfm2174.bin 1988 iroc 305 tpi auto 2.73 stock do my numbers look in order for the stock read? I looked at some others online and my values appears little higher across the board, maybe cause i am 305 vs 350 from others i have saw?
The read I pulled from TP was using the 27SF512 chip setting with the offset of
chip 00C000-00FFFF
buffer 00000-003FFF
I plugged my stock memcal into the HDR and APU1 and read successful. Is that ok? Did I have to use a 29C or read only chip setting?
Thread
Thread Starter
Forum
Replies
Last Post