I've tried searching for it, but all I can find is people asking specific questions about the program. I just wanted an overview of what it is and where I can find it. I tried http://members.tripod.com/moatesenheimer/gmecm but that link does not work - page not found. Any help would be greatly appreciated. Thanks.

 

New location:

http://ice.prohosting.com/moates/gmecm/index.html

Please pass it along...

-Craig

 

I just downloaded the Craig Moates software. I do not plan on using it until i get the materials to burn my own chips. Where do i get the materials to do so? I have an old 486 computer and i also read that you can make an aldl attachment from a serial connector at this site; http://www.techedge.com.au/vehicle/aldl8192/8192hw.htm
Has anyone done this? and will I need a scan tool? What materials will I need to buy and what tools can i make my self to get started burning my own chips? Any additional help would be greatly appricaited.

 

oops

 

Go here https://www.thirdgen.org/newdesign/tech/promintro.shtml

 

Thanks tc602. I'm not sure if it mentions that i need a scan tool or not?? Do i need a scan tool? I may try to fix my father-unlaw's 486 lap top and fab. a serial connector to my aldl unit and use that in place of a scan tool. Has anyone made thier own ALDL from a serial connector?

Thanks

Craiger

 

Sure, it's easy. Check my website for a few different schematics. There are similar designs, but they primarily pull from the MAX-232 or 2-transistor breeds.

 

So what type of cable do i Need? And i tried to open some of the software on your website and it would not open...error. Do I need to be running W95 or Dos 6.22?