Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

TBI to Carb-- VATS question

Thread Tools
 
Search this Thread
 
Old May 8, 2003 | 03:43 PM
  #1  
chevySS's Avatar
Thread Starter
Member
 
Joined: Apr 2001
Posts: 119
Likes: 0
From: Wilkesville, Ohio, USA
TBI to Carb-- VATS question

Okay I have a 91 RS with the LO3. The rings are shot in the LO3, and I am getting a sweet deal on a wrecked Camaro with a mildly modded L69, and I wanna pull the LO3 out and put in the L69.

I know I need an AFPR and all that, but if I take the ECM out, how will the VATS react? I don't want it to disable my car!

A friend of mine posted this for me in the Motor Swap forum as well, but I haven't got any replies thus far and figured maybe someone in this forum could help me out.

Thanks in advance!
Reply
Old May 9, 2003 | 07:08 AM
  #2  
Danno's Avatar
Supreme Member
 
Joined: Aug 2001
Posts: 1,896
Likes: 1
From: Warrington, PA USA
Car: "02 z-28
Engine: LS-1
Transmission: 4L60E
VATS does 2 things. It disables fuel injector operation, and disables the starter. I don't know what setup you will have as far as fuel delivery but one thing you will need to do is to disable the starter enable relay. It is located behind the kick panel on the driver side. Remove the relay and jump either of the 2 yellow wires to the tan/wht wire. That will bypass the starter enable circuit. Depending on how you intend to supply fuel I will need more specific info.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Glowsock
Tech / General Engine
13
Jul 24, 2025 03:15 PM
MustangBeater20
TBI
11
Oct 29, 2022 09:20 PM
Jae992
TBI
3
Aug 27, 2015 09:07 AM
ezobens
DIY PROM
8
Aug 19, 2015 10:29 PM
redmaroz
LTX and LSX
7
Aug 16, 2015 11:40 PM




All times are GMT -5. The time now is 05:26 PM.