alright, well, i'm a tad curious as to exactly how the ALDL is wired up, and where all the wires go. If someone has a diagram of it, that would be appreciated, also....the main reason i'm curious about the whole thing is i can't get my TCC lockup to work.

I'm in the middle of a 4th gen dash swap, and haven't yet done the speedo conversion stuff. I'm trying to see if i can get the TCC to lockup manually w/ a switch, (or paperclip between the switch and ground, and i'm not getting anything. Definately no locking action, so....do the wires from the TCC on the ALDL (think it's pink/black, or purple/black ... go directly to the transmission and ground? i know the ground is good as i can check my codes, etc. But....So essentially, where does the TCC wire go to. Thanks in advance.

 

c'mon guys , i'd really need a diagram for this, or atleast some help in finding where the wires go. I'd try to hunt them down, but i'm thinking their burried deep in 30 pounds of 1985 era electrical tape. also, can i splice into the wires that come from the transmission going to the TCC?