if im going to wire a toggle switch for my fan, which wires on the fan relay to i splice into, and even more important.. which relay is the fan one, closest to the fender or the engine.. btw car is 91 RS TBI... single fan...

 

The fan relay is the one closest to the fender and the wire is a green wire with a white stripe.

 

so i just splice the switch into that and no matter if my AC is on or off, no matter what it will turn on, right?

 

so all i have to do is splice the switch into that wire and no matter if my AC or thermostat is on, my fan will turn on?

 

nvm... i did what i should have done in the 1st place and did a search for master fan switch... i just had the switch going from the green/white fan relay and a ground.. works like a charm!




Switch

+ -
| |
| |
| |
| Ground
|
| Green/White relay wire