Hello,
I started installing power locks into my Camaro. Ive gotten to the wiring part, from what ive gathered, to wire my power locks I need to run wires from 2 seperate circuits. One is the crtsy. fuse, and ive tot it run and ready to go. But the problem im having is the pwr. acc. fuse. I dont have a wire coming from the pwr. acc circuit. So where do I need to get the wiring to finish off the power locks?
Thanks,
Han

 

The diagram that I have found says I need an Orange wire with a black stripe to goto the actuators. I looked for the orange/black wire and couldnt find one anywhere in my car. On closer inspection I found that the orange.black wire was actually the pwr acc. wire, and my car dosent have the pwr acc. wire leading from the fuse box. Is there a wire that I can use inplace of this orange/black wire to wire up my locks? Or is there an alternate wiring method to where I dont have to use it at all?
Thanks,
Han

 

*Bump*

Someone Please Help.
Han