got this diagram from another site there is a dark blue wire going from isolation relay to the motor but there is also a dark blue wire going to the turn signal lights are both these wires the same they are the wires that i circled.. the wire i have the arrow pointing to what color is that one suppose to be...

if you ask me these diagrams never look like whats in the car.

 

Looks like they are for 2 different circuts to me. Should use an ohmmeter and kick on your hazard switch and start testing the 2 wires. Or just start with the left side actuator and trace it back.

 

the thing is there is nothing realy to trace. when i bought the car the healdlight motors where there but nothing else like the clips that go into the relay or the relay them selvse. there is one old clip for passenger side but nothing for the driver side i cant even find any traces of the driver side being cut like it was never there. Thats why im having so much trouble in figuring this out the book i have says there is a blue/white wire going into the motor but i cant find such a wire......

oh and the dark blue wire going from the isolation relay right to the motor is that supposed to be 12v all times cause if so i can hook it up to the battery just to see if it works right