Wiring TACH w/MSD Ignition
Thread Starter
Supreme Member
Joined: Oct 2001
Posts: 3,155
Likes: 2
From: Louisville, Ky
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Wiring TACH w/MSD Ignition
Due to my screwed factory tach I am going to temp. install a cheap Sunpro tach when I first get the motor fired. What wire do I need to connect the signal wire to from the car to the tach?
I am running a MSD 6AL box with their coil and the MSD harness.
I am running a MSD 6AL box with their coil and the MSD harness.
Junior Member
Joined: Feb 2006
Posts: 83
Likes: 3
From: Southern IN
Car: 89 Camaro, 00Xtreme s-10, 89 Buick "Party Ave"
Engine: 305tbi
Transmission: 700r
sorry I missed the msd part I have no idea how those work....I had posted on how you would run the wire off a stock set-up...
Last edited by ryan77; Dec 22, 2006 at 11:26 AM. Reason: missread
Thread
Thread Starter
Forum
Replies
Last Post
91, aftermarket, box, camaro, connect, gen, ignition, installation, msd, suburban, sunpro, tach, tachometer, tbi, wiring
