Now, before anyone moves this, let me explain what I'm trying to do. I have an older computer joystick I have taken the handle unit from, taken the guts out, and modified. It now has six switches in it, three of which are going to be used for the cruise control in replacement of my stock lever switch. Now, two of the switches are used in parallel to control a relay that runs the starter when the clutch is depressed. But, the last switch is the one that I need help with. I have a good 125VAC switch, which I want to use to control only the headlights. When the switch is turned on, I want the headlights to come on and go up, just like if i were to use the stock switch, which I still want to work, btw, and I want the lights to go down when I turn the switch off. Now, I always drive with the parking lights on, so I want to feed the switch off of that and use 2 relays if I have to. Any suggestions?