I recently got a hold of the required parts to replace the upper intake plenum on my 3.1, including the plenum, TB, computer control stuff, and gaskets. I already had the wiring harnesses for the newer TPS and IAC from when I was expecting to be able to swap LAST YEAR ( ). I thought I had the IAC wired in correctly, but, somewhere along the line of the junkyard donor sitting out for a long time without use and the time I had the connectors before I installed them, all four wires ended up light green. I have no idea whether the connector is wired properly, and I need a pinout for the newer system (the inline IAC connector, rather than the older-style square like one) from, I would guess, 89-92 V6's, so I can fix this.