horn wire cut!?!

Subscribe
May 5, 2010 | 03:24 AM
  #1  
when i bought my car the horn didnt work and i wondered why...
i figured cuz the steering wheels airbag had been deployed but i looked under the hood and the wire was cut.
so i figured he got itto an accident and he had to cut the wire for the horn to go off.
the horn is there and there is some wire dangling from it.
how do i fix this...i would like a horn!?!
Reply 0
May 5, 2010 | 10:38 AM
  #2  
Need Those Horns To Wake Up The Cell Phone Morons
It might have been cut because the horns wouldn’t silence.

Connect it to see if that’s the case.

Then post results for further instructions.


Happy Racing!



He Must Have Been Be Cheating - Because I Was And He Almost Beat Me.
……..
Reply 0
Jul 23, 2013 | 11:25 PM
  #3  
Re: horn wire cut!?!
This seems like my problem right here, dont know how to wire it back to the relay though
Reply 0
Aug 5, 2013 | 04:43 PM
  #4  
Need Those Horns To Wake Up The Cell Phone Morons
The wire from the horns to the relay goes from the horns to a connector located on the left side of firewall below the relay bracket.

It’s a
16 AWG dark green wire.

From there it goes to pin K of the relay.


Happy Racing!



“Help” Me Into The Wall This Week, I’ll Just “Help” You Into The Wall Next Week

Reply 0
Aug 12, 2013 | 12:52 PM
  #5  
Re: Need Those Horns To Wake Up The Cell Phone Morons
Quote:
The wire from the horns to the relay goes from the horns to a connector located on the left side of firewall below the relay bracket.

It’s a
16 AWG dark green wire.

From there it goes to pin K of the relay.


Happy Racing!



“Help” Me Into The Wall This Week, I’ll Just “Help” You Into The Wall Next Week

thx for your help
Reply 0
Subscribe