Connector Confusion
Thread Starter
Junior Member
Joined: May 2011
Posts: 2
Likes: 0
Connector Confusion
I rebuilt my engine on my 87 305 TPI iroc-z and I have connectors I can't seem to figure where they go. I've gone through the Chilton's manual and can't seem to figure it out.
Any assistance would be so appreciated..
Image 1 = light brown greasy plug (really long plug)
Image 2 = Light Green and Blue Wires plug
Image 3 = pinkish/black strip and black wire
Any assistance would be so appreciated..
Image 1 = light brown greasy plug (really long plug)
Image 2 = Light Green and Blue Wires plug
Image 3 = pinkish/black strip and black wire
Joined: Mar 2006
Posts: 4,370
Likes: 18
Car: 1973 Datsun 240Z/ 1985 S-15 Jimmy
Engine: Turbo LX9/To be decided
Transmission: 5-speed/T-5
Axle/Gears: R200 3.90/7.5" 3.73
Re: Connector Confusion
Image 1 = Oil Pressure Sending Unit
Image 2 = Reverse light (Should plug into trans harness/extension).
Image 3 = Not sure.
Image 2 = Reverse light (Should plug into trans harness/extension).
Image 3 = Not sure.
Supreme Member
Joined: Sep 2002
Posts: 9,192
Likes: 19
From: Cary, North Carolina
Car: 1992 RS
Engine: Carbed 350
Transmission: 700R4
Axle/Gears: 3.42 posi
Re: Connector Confusion
Here's wiring diags might help: http://www.austinthirdgen.org/index.php?pid=19
Thread
Thread Starter
Forum
Replies
Last Post
TMZIrocZ350
Engine/Drivetrain/Suspension Parts for Sale
1
Oct 7, 2015 12:09 PM
tmork454
Transmissions and Drivetrain
0
Sep 29, 2015 06:33 PM