Need Help Please
Need Help Please
I have a 84 Z28. When you turn the dash lights on the hazards stop working and the left turn signal light is constantly on. It is a replacment cluster with a new printed circuit. Normal bulbs not leds. I have checked the ground wires and they are tight. Please help before i rip my hair out. 
Supreme Member
Joined: Jan 2006
Posts: 3,341
Likes: 10
From: Mooresville NC
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Signal Jingle
Make sure all bulbs are the good, and that you don’t have a stop lamp in place of a turn signal or vice-versa.
Make sure all 3-contact type bulbs are not installed backwards.
Some wild symptoms have been reported when bulbs are incorrect type or installed wrong.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Rule Number 1 Is To Know Which Rules You Can Break
.
Make sure all 3-contact type bulbs are not installed backwards.
Some wild symptoms have been reported when bulbs are incorrect type or installed wrong.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Rule Number 1 Is To Know Which Rules You Can Break
.
Re: Need Help Please
Nina Thank you 
. I put some old bulbs in and it sems to have cured the issue. I guess these old cars don't like newer led bulbs. I am going to get some new bulbs and be happy with the fact they work. Again Thank you. 
. I put some old bulbs in and it sems to have cured the issue. I guess these old cars don't like newer led bulbs. I am going to get some new bulbs and be happy with the fact they work. Again Thank you.