My attempt at a speedo repair... No buffer box, ecm, or vss.
Thread Starter
Senior Member
iTrader: (5)
Joined: Mar 2004
Posts: 574
Likes: 0
From: Richlands N.C.
Car: '92 RS
Engine: 350 carb'd
Transmission: T-5
Axle/Gears: 4.10
My attempt at a speedo repair... No buffer box, ecm, or vss.
I currently have a 1992 RS that has an inop speedo because of no ecm and a mechanical drive T-5. All the factory wires have pretty much been removed so I will be winging it. I called Dakota Digital and they told me that that the SGI-5 and the SEN-01-1 wil work for me. I searched and couldnt find where anyone has done this so I hope it will help some along the lines. I just got these 2 pieces in and hope in the next few weeks I can take some pics and update the thread. I orginally wanted to swap in my dash from my 1985 Z28 and have everything function like factory but this will be the quicker route at the moment.
Thread Starter
Senior Member
iTrader: (5)
Joined: Mar 2004
Posts: 574
Likes: 0
From: Richlands N.C.
Car: '92 RS
Engine: 350 carb'd
Transmission: T-5
Axle/Gears: 4.10
Re: My attempt at a speedo repair... No buffer box, ecm, or vss.
Well I sold the car and never got to try this. Oh well....
Thread
Thread Starter
Forum
Replies
Last Post
