Tach Swap
Thread Starter
Senior Member
Joined: May 2012
Posts: 705
Likes: 95
From: Manitoba, Canada
Car: 1987 Z28 IROC
Engine: 6.2L
Transmission: 700R4
Axle/Gears: 3.23
Tach Swap
I have a 1985 Z28 that has a 5000RPM redline tach. I got a tach from the junkyard that is a 6000RPM redline.
Is this a direct swap? Are all tachs interchangeable?
Is this a direct swap? Are all tachs interchangeable?
Joined: Sep 2005
Posts: 27,918
Likes: 2,448
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: Tach Swap
Yup, those will interchange.
Not all tachs will swap: 4/6/8 cyl ones are different. But as long as they're for the right # of cyls, they will.
Not all tachs will swap: 4/6/8 cyl ones are different. But as long as they're for the right # of cyls, they will.
Thread Starter
Senior Member
Joined: May 2012
Posts: 705
Likes: 95
From: Manitoba, Canada
Car: 1987 Z28 IROC
Engine: 6.2L
Transmission: 700R4
Axle/Gears: 3.23
Joined: Aug 1999
Posts: 5,266
Likes: 463
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: Tach Swap
The tach you got from the scrap yard probably IS a V6 Tach. Look at the oil pressure guage,...... 30/60 = V8 and 40/80 = V6.
The 'HO' or '350' version of the V8 Tachometer has a yellow @ 5K and red @ 5500 RPM. All other V8's are 4400 Yellow line.
Thread
Thread Starter
Forum
Replies
Last Post
