spedo making loud grinding noise, needle jumps.. dash and running lights off
Thread Starter
Junior Member
Joined: Oct 2015
Posts: 27
Likes: 0
From: Erie, PA
Car: 1988 Camaro RS
Engine: 2.8L v6
Transmission: 700r4 stock?
Axle/Gears: peg leg one tire fire
spedo making loud grinding noise, needle jumps.. dash and running lights off
Hi, i have an 88 camaro with a spedo problem. I was driving to school this morning and then as soon as i made a turn, my spedometer just started making a loud grinding noise. the faster i go, the louder it got. the needle moves all around, ( at 35mph the gauge reads 100 mph)
I think this might be related to my other electronic problem. In the process of replacing a old aftermarket radio with a new one when all of a sudden, my dash lights, ac back light, and back tail running lights no longer work. Replaced all the fuses and no luck, no broken ones either.
ugh! what should I check out?
Thanks,
Ben
I think this might be related to my other electronic problem. In the process of replacing a old aftermarket radio with a new one when all of a sudden, my dash lights, ac back light, and back tail running lights no longer work. Replaced all the fuses and no luck, no broken ones either.
ugh! what should I check out?
Thanks,
Ben
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: spedo making loud grinding noise, needle jumps.. dash and running lights off
You speedo head is mechanical, so your problems should be unrelated. The following link should be helpful where the speedo is concerned:
https://www.thirdgen.org/forums/inte...eedo-woes.html
JamesC
https://www.thirdgen.org/forums/inte...eedo-woes.html
JamesC
Thread Starter
Junior Member
Joined: Oct 2015
Posts: 27
Likes: 0
From: Erie, PA
Car: 1988 Camaro RS
Engine: 2.8L v6
Transmission: 700r4 stock?
Axle/Gears: peg leg one tire fire
Re: spedo making loud grinding noise, needle jumps.. dash and running lights off
thanks for the response, ill check it out!
Thread Starter
Junior Member
Joined: Oct 2015
Posts: 27
Likes: 0
From: Erie, PA
Car: 1988 Camaro RS
Engine: 2.8L v6
Transmission: 700r4 stock?
Axle/Gears: peg leg one tire fire
Re: spedo making loud grinding noise, needle jumps.. dash and running lights off
so ive fixed my electrical issue.. the brake light fuse was out. However I still have the spedometer issue.
It only makes the noise when the interior is really cold from sitting overnight outside. Once the interior warms up, the noise stops and functions normally.. A friend told me it could be the gears slipping in the cold weather.. has anyone else had this issue?
It only makes the noise when the interior is really cold from sitting overnight outside. Once the interior warms up, the noise stops and functions normally.. A friend told me it could be the gears slipping in the cold weather.. has anyone else had this issue?
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: spedo making loud grinding noise, needle jumps.. dash and running lights off
JamesC
Thread
Thread Starter
Forum
Replies
Last Post
gunznrosez87
Tech / General Engine
10
Oct 14, 2015 11:56 PM
sjorgens
Suspension and Chassis
7
Oct 1, 2015 07:54 PM







